Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
2
Homosalate (5%)
Roles: Skin conditioning, Fragrance
UV Protection
3
Octinoxate (7.4%)
UV Protection
Octinoxate is an effective sun protector that absorbs UV-B rays mostly. That means it can help to protect the skin from burns and from cancer. It’s also a solvent for other sunscreen components. This helps manufacturers to make products less oily.
4
Octocrylene (3%)
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
5
Oxybenzone (1.5%)
UV Protection
6
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Dipropylene Glycol is a solvent, emulsifier, viscosity decreasing, and masking agent. It helps to extract useful chemicals from plants and leaves, making natural components in a product more effective. It also helps to hydrate the skin. Considered safe for health and doesn't irritate the skin in common concentration.
Betaine is used a lot in “organic” skincare products. It is a good moisturizer that not only hydrates the skin but also strengthens the cell membrane. This helps to lower the water loss over time. It also softens the skin and reduces irritation and redness. It’s often used at a 3-5% concentration depending on the product.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
12
SD Alcohol 40-B
13
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
14
Isododecane
Roles: Emollient, Fragrance, Solvent
Softening
Isododecane is an emollient and a good base for colorants. Very often used in powders and shades because it spreads on the skin nicely. It also helps to soften the skin and helps to lower water loss making all the moisturizing components work better.
15
Isohexadecane
Roles: Skin conditioning, Emollient, Solvent
Softening
Protection
16
Beheneth-20
Roles: Emulsifying, Surfactant
17
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
18
Myristyl Myristate
Roles: Skin conditioning, Emollient
Softening
Comedogenic rating [ 5 ]
Bad for oily skin
Myristyl Myristate is an emollient. It makes the product look consistent and feel smooth on the skin. The negative side is that it has a very high comedogenic rating. It may lead to clogged pores if you suffer from acne.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
22
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
23
PEG/PPG-14/7 Dimethyl Ether
Roles: Skin conditioning
24
PEG/PPG-17/4 Dimethyl Ether
Roles: Skin conditioning
25
CaffeineAntioxidant
Roles: Skin conditioning, Fragrance, Masking
UV Protection
Anticellulite
Tones up skin
Hair growth stimulating
Good for dry skin
Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.
It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.
Green Tea Leaf Extract is a great antioxidant often used in Korean skincare products. It contains EGCG - the most effective flavonoid. It makes the skin look fresh, fills it with vitamines, and helps to prevent aging. It also helps to lower inflammation.
Stearyl Alcohol creates a barrier on the skin's surface lowering the evaporation of water and making it hydrated for a longer time. This barrier helps the skin to recover after deep cleansing. It also makes the skin look smooth. Though it belongs to alcohols, it's a fatty alcohol and it doesn't make your skin dry.
Alcohol Denatured is a great bacteria killer. Manufacturers often put it inside products to increase their shelf life.
40
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
41
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
42
Cellulose Gum
Roles: Binding, Emulsion stabilizer, Film former, Fragrance, Masking, Viscosity controlling
43
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
44
Sodium Metaphosphate
Roles: Buffering, Chelating
Cleansing
45
Potassium Hydroxide
Roles: Buffering
46
Sodium Metabisulfite
Roles: Preservative
47
TocopherolAntioxidant
Roles: Skin conditioning, Fragrance
UV Protection
Anti-aging
Regeneration
Comedogenic rating [ 3 ]
Good for dry skin
Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!
48
Hdi/Trimethylol Hexyllactone Crosspolymer
Roles: Anticaking
49
Cinnamonum Cassia (Cinnamon)
Roles: Fragrance
Softening
Soothing
Elasticity improvement
Rejuvenation
Tones up skin
Regeneration
Hair strengthening
Hair gloss
Hair follicle nutrition
50
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
51
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
52
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
