Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
2
Caprylic/Capric Triglyceride
Roles: Skin conditioning, Fragrance
Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.
It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Niacinamide is a form of Vitamin B3 and it’s a superman in cosmetics. This ingredient is researched very well. It has a lot of positive reviews from scientists and experts. It's very important for healthy skin. The lack of this vitamin can cause dryness, itching, and sun sensitivity. The component removes small wrinkles and fine lines, heals wounds, and prevents the forming of cancer cells. It also makes the skin tone even by removing dark spots. It increases ceramide synthesis which increases the overall health of your skin. It fights acne and lowers pores.
Researches say that 4-5% of Niacinamide is the most effective concentration for skincare use.
6
Pentylene Glycol
Roles: Skin conditioning, Solvent
Moisturizing
Hair conditioning
Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.
7
PEG-8
Roles: Humectant, Solvent
Soothing
PEG
8
1,2-Hexanediol
Roles: Solvent
Moisturizing
Good for dry skin
1,2-Hexanediol can do a lot of good things for the formulation of the product. It’s an emollient, preservative, and humectant. It keeps skin hydrated and soft. It’s a good component for dry and dehydrated skin.
9
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Roles: Emulsion stabilizer, Film former, Viscosity controlling
AcrylatesC10-30 Alkyl Acrylate Crosspolymer is a synthetic non-toxic gel used mostly for formulation purposes. It helps manufacturers to achieve the necessary texture of the product (it makes the product thicker). It also has sight healing and antistatic activity.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
14
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
17
Dimethicone/Vinyl Dimethicone Crosspolymer
Roles: Viscosity controlling
18
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
19
Ethyl Hexanediol
Roles: Fragrance, Solvent
20
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
28
Polysorbate-60
Roles: Emulsifying, Fragrance, Surfactant
Soothing
Antiseptic
Malassezia unsafe
Polysorbate-60 is an emulsifier, foam stabilizer, and surfactant. It’s considered to be safe but if the product contains PEG ingredients, Polysorbate may produce 1,4-Dioxane which can be harmful to your health.
29
Royal Jelly Extract
Roles: Skin conditioning
30
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
31
Silk Amino Acids
Roles: Skin conditioning, Hair conditioning
Moisturizing
Softening
Tones up skin
Hair conditioning
Hair structure improvement
32
Sorbitan Isostearate
Roles: Emulsifying, Surfactant
Softening
Comedogenic rating [ 2 ]
33
Tin Oxide
Roles: Abrasive, Bulking, Viscosity controlling
34
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
37
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
38
Alpha-Isomethyl Ionone
Roles: Fragrance, Masking
Allergens
39
Benzyl Benzoate
Roles: Antimicrobial, Fragrance, Masking, Solvent
Allergens
Benzyl Benzoate is a potentially harmful fragrance ingredient. It's one of the “EU 26 fragrances” that has to be labeled separately because of allergen potential. It's a good idea to avoid this component if you have sensitive skin.
40
Lilial
Roles: Fragrance, Masking
Allergens
41
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
42
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
43
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
44
FD&C Yellow No. 6 (Ci 15985)
Roles: Colorant
45
FD&C Yellow 5 (Ci 19140)
Roles: Colorant
46
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
