Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
3
Ethylhexyl Salicylate
4
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.
8
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Cetyl Alcohol is a fatty alcohol. It’s responsible for making your skin soft and improving product thickness. It makes the product easier to apply and feel richer. Though it contains the word “Alcohol” in its title, the component doesn’t belong to harmful alcohols. That’s why a product with this component can still be marked as Alcohol-free. Usually, manufacturers receive this component from coconut or palm oil.
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
13
Citrus Limon Fruit Extract/lemon Fruit Extract
14
Citrus Paradisi Fruit Extract/grapefruit Fruit Extract
Stearic Acid doesn’t belong to aggressive acids. It’s a fatty acid that can be found in Shea Butter, Cocoa Butter, and many natural butters and oils. The component is mostly used for formulation purposes. It makes the product spread and feel better. It’s one of the most important fatty acids in our skin cells.
17
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
19
Cetearyl Glucoside
Roles: Emulsifying, Surfactant
Moisturizing
Softening
20
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
21
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
22
Sodium Polyacrylate Starch
Roles: Binding, Emulsion stabilizer, Film former, Viscosity controlling
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
Palmitic Acid is an emulsion stabilizer. It reduces water evaporation from the surface of your skin. That’s why this component is good if you suffer from dryness. It also increases the efficiency of other surfactants in the formulation. It can be found in many organic oils including Avocado oil, Cocoa oil, Olive oil etc.
27
Adenosine
Roles: Skin conditioning
28
Ascorbyl GlucosideAntioxidant
UV Protection
Anti-aging
Lightening
29
HydroxyacetophenoneAntioxidant
30
Capryloyl Salicylic Acid
Roles: Skin conditioning
31
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.
Allowed concentration: no more than 0,3% for European Union countries.
35
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
36
CI 77891/titanium Dioxide
37
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
38
Geraniol
Roles: Fragrance, Masking
Allergens
Geraniol is a fragrance ingredient that gives product a nice rose scent. That’s why it’s used by many manufacturers. In addition to its pleasant scent, it also provides an antifungal effect increasing the shelf life of a product. There are several ways of obtaining this ingredient but all of them are chemical.
39
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
40
Citronellol
Roles: Fragrance, Masking
Allergens
Citronellol makes the product smell better. It’s one of the most frequently used fragrance ingredients in the world. It smells like a fresh cut of apple peel mixed with a citrus scent. It’s also used to enhance flower scent. It has slight anti-bacterial activity.
Beware! This component is in the list of potential allergens and can cause allergic contact dermatitis.
41
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
