Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Propylene Glycol is a useful componet with many positive effects. It’s a very good moisturizer. It helps to deliver ingredients into deeper layers of the skin. It creates a protective layer on the skin preventing water loss. The component is researched very well and doesn’t have notable side effects. It’s used even for making food.
7
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
8
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
9
Polymethyl Methacrylate
Roles: Film former
10
Ethylhexyl Triazone
UV Protection
11
Ethylhexyl Methoxycinnamate
12
Styrene/Acrylates Copolymer
Roles: Film former
13
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
Roles: Binding, Emulsion stabilizer, Film former, Fragrance, Masking, Viscosity controlling
21
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
22
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.
24
Dehydroacetic Acid
Roles: Preservative
Antiseptic
Dehydroacetic Acid is a nice preservative. It has potent antifungal and antibacterial properties. It’s not toxic and it doesn’t irritate the skin. Used to increase the shelf life of a product.
Benzoic acid is a preservative and pH adjuster. Human skin accepts this component very nicely. It doesn’t cause irritation or other negative reactions. In 2017 there was a Cosmetic Ingredient Review Expert Panel meeting that confirmed the safety of this ingredient in skincare.
26
PEG-8 Laurate
Roles: Emulsifying, Surfactant
Softening
Malassezia unsafe
PEG
27
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
28
Sodium Laureth Sulfate
Roles: Cleansing, Emulsifying, Surfactant
Cleansing
Comedogenic rating [ 3 ]
Sulfates
Bad for dry skin
29
Chlorphenesin
Roles: Antimicrobial, Biocide, Preservative
Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.
Allowed concentration: no more than 0,3% for European Union countries.
Simmondsia Chinensis (Jojoba) Seed Oil is a great vegetable oil to counter dryness. It reduces inflammation and it’s a very nice ingredient for people with redness, eczema, and rosacea. It’s accepted very well by humans skin because its chemical structure is very similar to sebum. That’s why it will hardly provoke any allergy. It’s a very good helper for people with dry skin.
Stearic Acid doesn’t belong to aggressive acids. It’s a fatty acid that can be found in Shea Butter, Cocoa Butter, and many natural butters and oils. The component is mostly used for formulation purposes. It makes the product spread and feel better. It’s one of the most important fatty acids in our skin cells.
Roles: Binding, Film former, Viscosity controlling
41
Polysorbate-20
Roles: Emulsifying, Fragrance, Surfactant
Nutrifying
Malassezia unsafe
Polysorbate 20 doesn’t have any notable skin benefits but is used in cosmetics quite often. Manufacturers use it for formulation purposes. It improves the scent, texture, and feel of the product.
42
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
43
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
44
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
45
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
46
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
