Tom FordShade And IlluminatingIngredients

Lavandula Angustifolia (Lavender) Oil is known for ages. It has a pleasant scent but it's not the only great property of this component. It has great antiseptic and antibacterial activity which is great for oily skin. It also helps to heal small wounds and calm down the skin.

Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.

It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.

Betaine is used a lot in “organic” skincare products. It is a good moisturizer that not only hydrates the skin but also strengthens the cell membrane. This helps to lower the water loss over time. It also softens the skin and reduces irritation and redness. It’s often used at a 3-5% concentration depending on the product.

Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.

It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.

Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.

Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.

Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.

Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.

Phospholipids help to hydrate the skin and recover the lipid balance. If the skin lacks this component it can become dry. The component makes cell membranes more difficult to damage and this affects the overall health of the skin.

Stearyl Alcohol creates a barrier on the skin's surface lowering the evaporation of water and making it hydrated for a longer time. This barrier helps the skin to recover after deep cleansing. It also makes the skin look smooth. Though it belongs to alcohols, it's a fatty alcohol and it doesn't make your skin dry.

Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.

Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.

Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.

Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!

Palmitic Acid is an emulsion stabilizer. It reduces water evaporation from the surface of your skin. That’s why this component is good if you suffer from dryness. It also increases the efficiency of other surfactants in the formulation. It can be found in many organic oils including Avocado oil, Cocoa oil, Olive oil etc.

Stearic Acid doesn’t belong to aggressive acids. It’s a fatty acid that can be found in Shea Butter, Cocoa Butter, and many natural butters and oils. The component is mostly used for formulation purposes. It makes the product spread and feel better. It’s one of the most important fatty acids in our skin cells.

Polysorbate 80 is a formulation component. It helps the components to mix better and makes the product feel smooth on the skin.

Polysorbate 20 doesn’t have any notable skin benefits but is used in cosmetics quite often. Manufacturers use it for formulation purposes. It improves the scent, texture, and feel of the product.

Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.

Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.

Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.

Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.

BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.

Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.

Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.

Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.

Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.

Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.

The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.

Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.