Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
3
Caprylyl Methicone
Roles: Skin conditioning
Softening
4
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Squalane is a more stable equivalent of Squalene. It is a very important component of our skin. It’s a major part of natural sebum that forms a protection barrier on the skin's surface. If the barrier isn’t strong enough, your skin will become more sensitive. Squalanehelps to keep skin hydrated, protects it from the negative impact of the environment, lowers irritation, stimulates regeneration, and removes dryness. It is accepted by our skin very well and will not cause allergic reactions.
15
Aloe Barbadensis (Aloe Vera) Leaf Juice
Roles: Skin conditioning
UV Protection
Moisturizing
Soothing
Healing
Aloe Barbadensis (Aloe Vera) Leaf Juice is a natural juice received from Aloe leaves. It has been used in cosmetics for hundreds of ages. Scientists have discovered that it contains more than 200 nutrients: minerals, amino acids, vitamins, and so on. It’s a good component for calming irritated skin. It also helps to heal wounds, helps the skin regenerate faster, improves collagen syncretization, tones up, and moisturizes the skin. It also provides a slight UV-filtering effect.
16
Lithothamnion Calcareum Extract
17
Maris Aqua (Sea Water)
18
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
19
Steareth-21
Roles: Cleansing, Emulsifying, Surfactant
20
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
21
Xylitylglucoside
Roles: Skin conditioning, Humectant
22
Anhydroxylitol
Roles: Skin conditioning, Humectant
23
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
24
Chlorphenesin
Roles: Antimicrobial, Biocide, Preservative
Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.
Allowed concentration: no more than 0,3% for European Union countries.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
35
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
36
Xylitol
Roles: Skin conditioning, Flavoring, Humectant
Softening
37
Palmitoyl Methoxytryptamine
38
Polysorbate-60
Roles: Emulsifying, Fragrance, Surfactant
Soothing
Antiseptic
Malassezia unsafe
Polysorbate-60 is an emulsifier, foam stabilizer, and surfactant. It’s considered to be safe but if the product contains PEG ingredients, Polysorbate may produce 1,4-Dioxane which can be harmful to your health.
39
PPG-5-Laureth-5
Roles: Emollient, Emulsifying, Surfactant
40
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
41
Potassium Sorbate
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.
42
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Sorbitol is usually used for making different gels. It helps the product to keep water and it helps to deliver active components deeper into the skin. It is a moisturizing and soothing component. It is usually accepted well by all skin types.
Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
53
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
54
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
Benzyl Alcohol doesn’t belong to harmful alcohols and it will not dry your skin. It’s a stabilizing agent that prevents ingredients oxidization. Having this component in formulation the product will keep efficiency for a longer time. Benzyl Alcohol has a slight almond odor and is used as a fragrance ingredient very often.
56
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
57
Citronellol
Roles: Fragrance, Masking
Allergens
Citronellol makes the product smell better. It’s one of the most frequently used fragrance ingredients in the world. It smells like a fresh cut of apple peel mixed with a citrus scent. It’s also used to enhance flower scent. It has slight anti-bacterial activity.
Beware! This component is in the list of potential allergens and can cause allergic contact dermatitis.
58
Geraniol
Roles: Fragrance, Masking
Allergens
Geraniol is a fragrance ingredient that gives product a nice rose scent. That’s why it’s used by many manufacturers. In addition to its pleasant scent, it also provides an antifungal effect increasing the shelf life of a product. There are several ways of obtaining this ingredient but all of them are chemical.