Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
2
Octinoxate (6.99%)
UV Protection
Octinoxate is an effective sun protector that absorbs UV-B rays mostly. That means it can help to protect the skin from burns and from cancer. It’s also a solvent for other sunscreen components. This helps manufacturers to make products less oily.
3
Octocrylene (2%)
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
4
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
10
Methyl Gluceth-20
11
GluconolactoneAntioxidantPHA
Roles: Fragrance, Humectant, Solvent
Moisturizing
Acne fighting
Lifting
Gluconolactone belongs to poly hydroxy acids (PHA). It’s very similar to AHAs chemically, that’s why it is usually presented as a «Next Generation AHA». It has all the benefits of AHA but it doesn’t irritate the skin. It’s a strong natural antioxidant which is as strong as Tocopherol or Ascorbic Acid.
12
Polyacrylamide
Roles: Antistatic, Binding, Film former, Hair fixative
Cetyl Alcohol is a fatty alcohol. It’s responsible for making your skin soft and improving product thickness. It makes the product easier to apply and feel richer. Though it contains the word “Alcohol” in its title, the component doesn’t belong to harmful alcohols. That’s why a product with this component can still be marked as Alcohol-free. Usually, manufacturers receive this component from coconut or palm oil.
16
Bifida Ferment Lysate
Roles: Skin conditioning
17
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
18
Ammonium Acryloyldimethyltaurate/vp Copolymer
19
C13-14 Isoparaffin
Roles: Emollient, Solvent
20
Polysorbate 80
Roles: Emulsifying, Fragrance, Surfactant
Malassezia unsafe
Polysorbate 80 is a formulation component. It helps the components to mix better and makes the product feel smooth on the skin.
21
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Roles: Emulsion stabilizer, Film former, Viscosity controlling
AcrylatesC10-30 Alkyl Acrylate Crosspolymer is a synthetic non-toxic gel used mostly for formulation purposes. It helps manufacturers to achieve the necessary texture of the product (it makes the product thicker). It also has sight healing and antistatic activity.
22
Sodium Benzoate
Roles: Fragrance, Masking, Preservative
Antifungal
Antiseptic
Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.
23
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
24
Laureth-7
Roles: Emulsifying, Surfactant
Cleansing
25
Glycine Soja (Soybean) OilAntioxidant
Roles: Skin conditioning, Emollient, Fragrance
Moisturizing
Acne fighting
Lifting
Healing
Regeneration
Malassezia unsafe
Comedogenic rating [ 3 ]
Bad for oily skin
26
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
27
Iris Pallida (Dalmation Iris) Root Extract
Roles: Masking
28
Ruby Powder
Roles: Skin conditioning
29
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
Alcohol Denatured is a great bacteria killer. Manufacturers often put it inside products to increase their shelf life.
32
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.
34
Adenosine
Roles: Skin conditioning
35
Cellulose Gum
Roles: Binding, Emulsion stabilizer, Film former, Fragrance, Masking, Viscosity controlling
36
Retinol (Vitamin A)VitaminsAntioxidant
Roles: Skin conditioning
Nutrifying
Hair structure improvement
37
PEG-8
Roles: Humectant, Solvent
Soothing
PEG
38
Polysorbate-20
Roles: Emulsifying, Fragrance, Surfactant
Nutrifying
Malassezia unsafe
Polysorbate 20 doesn’t have any notable skin benefits but is used in cosmetics quite often. Manufacturers use it for formulation purposes. It improves the scent, texture, and feel of the product.
39
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
40
Chitosan
Roles: Film former, Hair fixative
Moisturizing
Rejuvenation
Antiseptic
Regeneration
Hair structure improvement
41
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
42
Glycolic AcidAHA
Roles: Buffering, Exfoliant
Cleansing
Exfoliating
Anti-aging
Lightening
Good for oily skin
Glycolic Acid is the most researched AHA with proven efficiency and it’s a super powerful component. It’s a great exfoliator, meaning it helps to remove dead skin cells preventing bacterial growth, and make your skin look fresh and smooth. It helps to remove dark spots and areas, making skin tone even. But the most serious reason for using this component is that it helps to produce collagen, which is very important for keeping your skin healthy. This is what makes Glycolic Acid so special. Pay attention, that using any AHA makes your skin more UV sensitive. It’s very important to use good sunscreen after applying AHA.
43
Sorbitan Oleate
Roles: Emulsifying, Fragrance, Surfactant
Softening
Malassezia unsafe
Comedogenic rating [ 3 ]
Bad for oily skin
44
Calcium Gluconate
Roles: Skin conditioning, Humectant
Soothing
45
TocopherolAntioxidant
Roles: Skin conditioning, Fragrance
UV Protection
Anti-aging
Regeneration
Comedogenic rating [ 3 ]
Good for dry skin
Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!
Ascorbyl Palmitate (Vitamin C Palmitate)VitaminsAntioxidant
Roles: Fragrance, Masking
Lightening
Nutrifying
Malassezia unsafe
Comedogenic rating [ 2 ]
Ascorbyl Palmitate is a derivative of ascorbic and palmitic acids. It's a fat-soluble form of Vitamin C. It penetrates into the skin through cell membranes. Acts as an antioxidant. Due to its antioxidant properties, it is considered a rejuvenating vitamin. Controls the production of collagen in cells. Non-irritant at neutral pH.
49
Beta-Glucan
Roles: Skin conditioning, Bulking
Moisturizing
Cleansing
Soothing
Healing
Rejuvenation
Protection
Good for dry skin
50
Potassium Phosphate
Roles: Buffering
Potassium Phosphate is an inorganic salt commonly used in cosmetics and skincare formulations. While it’s not a “hero ingredient” like niacinamide or ceramides, it plays important supporting roles that help a product stay stable, comfortable on the skin, and effective.
Potassium Phosphate (often listed as Dipotassium Phosphate or Monopotassium Phosphate depending on its form) is a buffering and chelating agent. In skincare chemistry, it helps regulate and maintain a product's pH balance — a crucial factor for both stability and skin compatibility. It helps to achieve PH balance by preventing the formula from becoming too acidic or too alkaline over time.
Main Functions:
pH Buffering Agent - Its primary purpose is to stabilize pH. Many active ingredients — such as niacinamide, ceramides, or hyaluronic acid — perform best within a particular pH range. Potassium Phosphate ensures they stay effective throughout the product’s shelf life.
Stabilizer for Emulsions - In creams and lotions, it helps maintain the stability of emulsions (the blend of water and oils), preventing unwanted separation.
Enhances Product Comfort - A stable pH often means better skin tolerance. By keeping the formula balanced, Potassium Phosphate indirectly helps reduce the risk of stinging, redness, and irritation, especially in sensitive skin.
Supports Ingredient Performance - Some actives can lose potency if the formula drifts out of range. Potassium Phosphate keeps the environment optimal, protecting their performance.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
52
1,2-Hexanediol
Roles: Solvent
Moisturizing
Good for dry skin
1,2-Hexanediol can do a lot of good things for the formulation of the product. It’s an emollient, preservative, and humectant. It keeps skin hydrated and soft. It’s a good component for dry and dehydrated skin.
Green Tea Leaf Extract is a great antioxidant often used in Korean skincare products. It contains EGCG - the most effective flavonoid. It makes the skin look fresh, fills it with vitamines, and helps to prevent aging. It also helps to lower inflammation.
Benzoic acid is a preservative and pH adjuster. Human skin accepts this component very nicely. It doesn’t cause irritation or other negative reactions. In 2017 there was a Cosmetic Ingredient Review Expert Panel meeting that confirmed the safety of this ingredient in skincare.
Roles: Skin conditioning, Binding, Emulsion stabilizer, Film former, Hair conditioning
Maltodextrin is an organic sugar derived from corn, rice, or potato. It is a multipurpose ingredient. It is a skin softener, absorbent, and film-forming agent. But mostly it’s used because of its viscosity-controlling effect. It makes the product feel even. It is ruled safe by CIR for use in cosmetics.
62
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Lactic Acid is the most popular and the least aggressive acid among all the AHAs. Unlike Salicylic and Glycolic acids which can irritate your skin, Lactic Acid will hardly cause any problems. The combination of its soft action and effectiveness makes it a real brilliant. It exfoliates dead cells, makes the skin tone even, clears pores, kills bacteria, moisturizes the skin and helps to keep water, helps the cells to produce Hyaluronic Acid. It also works as a strong antioxidant and anti-aging component.
It's a great acid for getting familiar with the world of AHAs. If you want to start using "fruit acids" but struggling for some reason, try to use Lactic Acid first. If your skin accepts it well, you can try stronger acids.
Vitamin C is known for its strong antioxidant activity. It helps to slow down aging processes. The other positive effect of this ingredient is that it helps to make skin tone even. It's a great ingredient to counter dark areas and uneven skin tone. It's well-researched and considered safe. But it's acid and can irritate the skin if used too often.
Sorbic Acid is a very effective synthetic preservative that is used even in food. It’s considered to be safe for use in cosmetic products. It’s great for increasing the shelf life of a product.
70
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.