Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
2
Hydrogenated Jojoba Oil
Roles: Skin conditioning, Abrasive, Emollient
3
Polyethylene
Roles: Abrasive, Binding, Bulking, Emulsion stabilizer, Film former, Viscosity controlling
Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.
5
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
7
Sodium C14-16 Olefin Sulfonate
Roles: Cleansing, Foaming, Surfactant
Cleansing
Sulfates
8
Glycolic AcidAHA
Roles: Buffering, Exfoliant
Cleansing
Exfoliating
Anti-aging
Lightening
Good for oily skin
Glycolic Acid is the most researched AHA with proven efficiency and it’s a super powerful component. It’s a great exfoliator, meaning it helps to remove dead skin cells preventing bacterial growth, and make your skin look fresh and smooth. It helps to remove dark spots and areas, making skin tone even. But the most serious reason for using this component is that it helps to produce collagen, which is very important for keeping your skin healthy. This is what makes Glycolic Acid so special. Pay attention, that using any AHA makes your skin more UV sensitive. It’s very important to use good sunscreen after applying AHA.
Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.
It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.
12
Croton Lechleri Resin Extract
Roles: Skin conditioning
Acne fighting
Soothing
Healing
Elasticity improvement
Antiseptic
Antiviral
Regeneration
13
Cinnamomum Zeylanicum Bark Extract
Roles: Skin conditioning
14
Avena Sativa (Oat) Kernel ExtractAntioxidant
Roles: Skin conditioning, Abrasive, Emollient
Softening
Anti-aging
Lifting
Elasticity improvement
Nutrifying
Rejuvenation
Regeneration
Protection
15
Prunus Amygdalus Dulcis (Sweet Almond) Oil
Roles: Skin conditioning, Fragrance
UV Protection
Moisturizing
Softening
Soothing
Hair strengthening
Hair growth stimulating
Malassezia unsafe
Good for dry skin
Bad for oily skin
Sweet Almond Oil is rich in Vitamin D, Vitamin E, and different minerals. It’s a very effective soothing component known from ancient times. It helps to protect the skin from the sun, make it softer and heal small wounds.
16
Prunus Armeniaca (Apricot) Kernel OilAntioxidant
Roles: Skin conditioning
Moisturizing
Softening
Soothing
Anti-aging
Rejuvenation
Comedogenic rating [ 2 ]
Prunus Armeniaca (Apricot) Kernel Oil is a light organic oil used in skincare products because of moisturizing, anti-aging, rejuvenation and softening effects. It contains vitamins (A, B, C), minerals, phospholipids. It soothes irritation and it’s a good choice for people with sensitive skin. It soaks in pretty fast without oily feeling.
17
Mangifera Indica (Mango) Seed Butter
Roles: Skin conditioning
18
Aloe Barbadensis (Aloe Vera) Leaf Juice
Roles: Skin conditioning
UV Protection
Moisturizing
Soothing
Healing
Aloe Barbadensis (Aloe Vera) Leaf Juice is a natural juice received from Aloe leaves. It has been used in cosmetics for hundreds of ages. Scientists have discovered that it contains more than 200 nutrients: minerals, amino acids, vitamins, and so on. It’s a good component for calming irritated skin. It also helps to heal wounds, helps the skin regenerate faster, improves collagen syncretization, tones up, and moisturizes the skin. It also provides a slight UV-filtering effect.
Allantoin usually doesn’t catch too much attention, but it is an essential ingredient for sensitive, dry, and problem skin. It is a good moisturizer that makes skin hydrated. But manufacturers love it because of its strong soothing effect. It also exfoliates dead cells, stimulates recovery of your skin, and helps to protect the skin from the sun, frost, and similar negative impacts.
The component is researched very well and its soothing activity is confirmed by scientists. Used in concentration between 0.5-2%.
22
Octinoxate
UV Protection
Octinoxate is an effective sun protector that absorbs UV-B rays mostly. That means it can help to protect the skin from burns and from cancer. It’s also a solvent for other sunscreen components. This helps manufacturers to make products less oily.
23
PEG-40 Hydrogenated Castor Oil
Roles: Emulsifying, Fragrance, Surfactant
Cleansing
Soothing
Malassezia unsafe
PEG
PEG-40 Hydrogenated Castor Oil helps ingredients to mix better. It has nice cleansing activity helping to remove sebum and dirt from the surface of your skin. It's also responsible for making soft foam in soaps, shower gels, etc. Despite it having "PEG" in the title, it's considered to be safe.
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Polysorbate 20 doesn’t have any notable skin benefits but is used in cosmetics quite often. Manufacturers use it for formulation purposes. It improves the scent, texture, and feel of the product.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
32
Magnesium Lactate
Roles: Skin conditioning, Buffering, Keratolytic
33
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
Sodium Citrate is a water-soluble soft organic surfactant with strong stabilizing and conditioning effects. It helps to produce foam and lowers the negative impact of hard water on your skin and hair. It also helps to regulate the pH level of the product. It’s a natural ingredient and it’s safe for most people. It’s used in food (additive number E331).
Propylene Glycol is a useful componet with many positive effects. It’s a very good moisturizer. It helps to deliver ingredients into deeper layers of the skin. It creates a protective layer on the skin preventing water loss. The component is researched very well and doesn’t have notable side effects. It’s used even for making food.
43
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
44
Triethoxycaprylylsilane
Roles: Binding
45
Diazolidinyl Urea
46
Propylparaben
Roles: Fragrance, Preservative
Parabens
47
Methylparaben
Roles: Fragrance, Preservative
Parabens
Methylparaben is an effective preservative. It is a controversial ingredient in terms of safety. In 2006 there was a laboratory test showed that this component can increase the sun sensitivity of the skin cells. That’s why it’s a good idea to use sunscreen after you use this component.
48
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
49
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
50
D&C Red No. 33 (Ci 17200)
Roles: Colorant, Hair colorant
51
FD&C Red No. 4 (Ci 14700)
Roles: Colorant
52
FD&C Yellow 5 (Ci 19140)
Roles: Colorant
53
CI 42090 (FD&C Blue No. 1 Or D&C Blue No. 4)
Roles: Colorant, Hair colorant
54
Iron Oxides (CI 77491
55
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.