Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
5
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Stearic Acid doesn’t belong to aggressive acids. It’s a fatty acid that can be found in Shea Butter, Cocoa Butter, and many natural butters and oils. The component is mostly used for formulation purposes. It makes the product spread and feel better. It’s one of the most important fatty acids in our skin cells.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.
12
Polyglyceryl-3 Diisostearate
Roles: Emollient, Emulsifying, Surfactant
Malassezia unsafe
Comedogenic rating [ 4 ]
Bad for oily skin
13
Aloe Barbadensis (Aloe Vera) Leaf Juice
Roles: Skin conditioning
UV Protection
Moisturizing
Soothing
Healing
Aloe Barbadensis (Aloe Vera) Leaf Juice is a natural juice received from Aloe leaves. It has been used in cosmetics for hundreds of ages. Scientists have discovered that it contains more than 200 nutrients: minerals, amino acids, vitamins, and so on. It’s a good component for calming irritated skin. It also helps to heal wounds, helps the skin regenerate faster, improves collagen syncretization, tones up, and moisturizes the skin. It also provides a slight UV-filtering effect.
14
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Green Tea Leaf Extract is a great antioxidant often used in Korean skincare products. It contains EGCG - the most effective flavonoid. It makes the skin look fresh, fills it with vitamines, and helps to prevent aging. It also helps to lower inflammation.
20
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Simmondsia Chinensis (Jojoba) Seed Oil is a great vegetable oil to counter dryness. It reduces inflammation and it’s a very nice ingredient for people with redness, eczema, and rosacea. It’s accepted very well by humans skin because its chemical structure is very similar to sebum. That’s why it will hardly provoke any allergy. It’s a very good helper for people with dry skin.
23
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
24
Vitis Vinifera (Grape) Seed OilAntioxidant
Roles: Skin conditioning, Emollient
Elasticity improvement
Nutrifying
Good for oily skin
Vitis Vinifera (Grape) Seed Oil is a very strong antioxidant and it's a very valuable skincare component. It's great for treating acne. It helps to deliver vitamins into the deep layers of your skin. It improves elasticity and helps to treat wrinkles.
25
Methylparaben
Roles: Fragrance, Preservative
Parabens
Methylparaben is an effective preservative. It is a controversial ingredient in terms of safety. In 2006 there was a laboratory test showed that this component can increase the sun sensitivity of the skin cells. That’s why it’s a good idea to use sunscreen after you use this component.
26
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
27
Butylparaben
Roles: Fragrance, Masking, Preservative
Parabens
28
Ethylparaben
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Parabens
29
Propylparaben
Roles: Fragrance, Preservative
Parabens
30
Isobutylparaben
Roles: Preservative
Parabens
31
Tetrasodium EDTA
Roles: Chelating
Tetrasodium EDTA is a formulation component. It is a pH adjuster and chelate. It prevents other components from reacting with each other making the product live longer.
32
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
33
Iron Oxides (CI 77489
34
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
35
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.