LumeneLähde Intense Hydration 24HIngredients

Betaine is used a lot in “organic” skincare products. It is a good moisturizer that not only hydrates the skin but also strengthens the cell membrane. This helps to lower the water loss over time. It also softens the skin and reduces irritation and redness. It’s often used at a 3-5% concentration depending on the product.

Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.

Cetyl Alcohol is a fatty alcohol. It’s responsible for making your skin soft and improving product thickness. It makes the product easier to apply and feel richer. Though it contains the word “Alcohol” in its title, the component doesn’t belong to harmful alcohols. That’s why a product with this component can still be marked as Alcohol-free. Usually, manufacturers receive this component from coconut or palm oil.

Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.

Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.

Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.

Allantoin usually doesn’t catch too much attention, but it is an essential ingredient for sensitive, dry, and problem skin. It is a good moisturizer that makes skin hydrated. But manufacturers love it because of its strong soothing effect. It also exfoliates dead cells, stimulates recovery of your skin, and helps to protect the skin from the sun, frost, and similar negative impacts.

The component is researched very well and its soothing activity is confirmed by scientists. Used in concentration between 0.5-2%.

Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.

Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.

Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!

Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.

It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.

Sodium Citrate is a water-soluble soft organic surfactant with strong stabilizing and conditioning effects. It helps to produce foam and lowers the negative impact of hard water on your skin and hair. It also helps to regulate the pH level of the product. It’s a natural ingredient and it’s safe for most people. It’s used in food (additive number E331).

Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.

Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.

Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.

Ascorbyl Palmitate is a derivative of ascorbic and palmitic acids. It's a fat-soluble form of Vitamin C. It penetrates into the skin through cell membranes. Acts as an antioxidant. Due to its antioxidant properties, it is considered a rejuvenating vitamin. Controls the production of collagen in cells. Non-irritant at neutral pH.

Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.

Potassium Phosphate is an inorganic salt commonly used in cosmetics and skincare formulations. While it’s not a “hero ingredient” like niacinamide or ceramides, it plays important supporting roles that help a product stay stable, comfortable on the skin, and effective.

Potassium Phosphate (often listed as Dipotassium Phosphate or Monopotassium Phosphate depending on its form) is a buffering and chelating agent. In skincare chemistry, it helps regulate and maintain a product's pH balance — a crucial factor for both stability and skin compatibility. It helps to achieve PH balance by preventing the formula from becoming too acidic or too alkaline over time.

Main Functions:

• pH Buffering Agent - Its primary purpose is to stabilize pH. Many active ingredients — such as niacinamide, ceramides, or hyaluronic acid — perform best within a particular pH range. Potassium Phosphate ensures they stay effective throughout the product’s shelf life.
• Stabilizer for Emulsions - In creams and lotions, it helps maintain the stability of emulsions (the blend of water and oils), preventing unwanted separation.
• Enhances Product Comfort - A stable pH often means better skin tolerance. By keeping the formula balanced, Potassium Phosphate indirectly helps reduce the risk of stinging, redness, and irritation, especially in sensitive skin.
• Supports Ingredient Performance - Some actives can lose potency if the formula drifts out of range. Potassium Phosphate keeps the environment optimal, protecting their performance.

Vitamin C is known for its strong antioxidant activity. It helps to slow down aging processes. The other positive effect of this ingredient is that it helps to make skin tone even. It's a great ingredient to counter dark areas and uneven skin tone. It's well-researched and considered safe. But it's acid and can irritate the skin if used too often.

Helianthus Annuus (Sunflower) Oil is an ingredient known from ancient times. It’s the oil people receive from Sunflower Seeds and use for different purposes, including cooking. It contains a lot of Lenoic acid which moisturizes the skin, makes it softer, and reduces inflammation. The oil also works as an occlusive agent that forms a protective film and helps to keep skin hydrated.

As for haircare, it’s the second most popular basic oil used in haircare products. It helps to lower hair fragility and make hair softer.

Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.

Benzyl Salicylate is a fragrance component with a pleasant flower odor. It can be an allergy trigger and should be used carefully. Pay attention to this ingredient in a formulation if you have sensitive skin or if you have an allergy.

Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.

Citronellol makes the product smell better. It’s one of the most frequently used fragrance ingredients in the world. It smells like a fresh cut of apple peel mixed with a citrus scent. It’s also used to enhance flower scent. It has slight anti-bacterial activity.

Beware! This component is in the list of potential allergens and can cause allergic contact dermatitis.

Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".