LACURAPink Clay And Golden Glow Multi-MaskIngredients

Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.

Alcohol Denatured is a great bacteria killer. Manufacturers often put it inside products to increase their shelf life.

Alcohol Denatured is a great bacteria killer. Manufacturers often put it inside products to increase their shelf life.

Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".

Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.

Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.

Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.

Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.

Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.

Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.

Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.

It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.

Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.

Allantoin usually doesn’t catch too much attention, but it is an essential ingredient for sensitive, dry, and problem skin. It is a good moisturizer that makes skin hydrated. But manufacturers love it because of its strong soothing effect. It also exfoliates dead cells, stimulates recovery of your skin, and helps to protect the skin from the sun, frost, and similar negative impacts.

The component is researched very well and its soothing activity is confirmed by scientists. Used in concentration between 0.5-2%.

Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".

Polysorbate 80 is a formulation component. It helps the components to mix better and makes the product feel smooth on the skin.

Bisabolol is one of the most effective healing ingredients in cosmetics. It is a great component for reducing inflammation. It contains a lot of Vitamin B5 known as Panthenol, but it acts much better than Panthenol due to its wider effectiveness. It softens the skin and helps to recover skin cells after dryness. It is also a nice protector – it helps to protect the skin from aggressive chemical and physical impact. Bisabolol, Panthenol, and Allantoin are the true saviors and very often you can find all these 3 components mixed in a product for better efficiency.

Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.

Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.

Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.

Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.

PEG-40 Hydrogenated Castor Oil helps ingredients to mix better. It has nice cleansing activity helping to remove sebum and dirt from the surface of your skin. It's also responsible for making soft foam in soaps, shower gels, etc. Despite it having "PEG" in the title, it's considered to be safe.

Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.

Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.

Sodium Citrate is a water-soluble soft organic surfactant with strong stabilizing and conditioning effects. It helps to produce foam and lowers the negative impact of hard water on your skin and hair. It also helps to regulate the pH level of the product. It’s a natural ingredient and it’s safe for most people. It’s used in food (additive number E331).

Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.

Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.

Eugenol is a fragrance and one of the ingredients you should use carefully. It is in the list of 26 European Union fragrances that have to be labeled separately because of allergen potential. Laboratory studies show that the component is cytotoxic even at low concentrations. But no studies were performed on humans. In general, it's not the best skincare component.

Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.

Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.

The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.

Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.