Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
6
Dicaprylyl Carbonate
Roles: Skin conditioning, Emollient
7
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
11
Octyldodecyl Neopentanoate
Roles: Emollient
12
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
16
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
Dipropylene Glycol is a solvent, emulsifier, viscosity decreasing, and masking agent. It helps to extract useful chemicals from plants and leaves, making natural components in a product more effective. It also helps to hydrate the skin. Considered safe for health and doesn't irritate the skin in common concentration.
18
Ethylene Brassylate
Roles: Fragrance, Masking
19
Ethyl Undecylenate
20
Methyldihydrojasmonate
Roles: Fragrance, Masking
21
Methyl Undecylenate
22
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
23
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
24
Hydrolyzed Hyaluronic Acid
Moisturizing
Anti-aging
Elasticity improvement
25
Hydrolyzed Wheat Protein/Pvp Crosspolymer
Roles: Film former, Hair conditioning, Hair fixative
26
Octyldodecanol
Roles: Emollient, Fragrance, Solvent
Moisturizing
Softening
27
Retinyl Palmitate (Vitamin A Palmitate)Vitamins
Roles: Skin conditioning
Softening
Anti-aging
Regeneration
Hair structure improvement
Malassezia unsafe
Comedogenic rating [ 3 ]
Good for dry skin
28
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
29
PEG-20 Sorbitan Isostearate
Roles: Cleansing, Emulsifying, Surfactant
PEG
30
Phytosteryl/Octyldodecyl Lauroyl Glutamate
Roles: Skin conditioning
31
Sodium Acetylated Hyaluronate
Roles: Humectant
32
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Stearyl Alcohol creates a barrier on the skin's surface lowering the evaporation of water and making it hydrated for a longer time. This barrier helps the skin to recover after deep cleansing. It also makes the skin look smooth. Though it belongs to alcohols, it's a fatty alcohol and it doesn't make your skin dry.
34
Tetrahexyldecyl AscorbateAntioxidant
Roles: Skin conditioning
UV Protection
Anti-aging
Lightening
Protection
35
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
36
Sorbitol/Sebacic Acid Copolymer Behenate
37
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
38
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.
40
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
41
Chlorphenesin
Roles: Antimicrobial, Biocide, Preservative
Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.
Allowed concentration: no more than 0,3% for European Union countries.