G.M. CollinPuractive+ CreamIngredients

Allantoin usually doesn’t catch too much attention, but it is an essential ingredient for sensitive, dry, and problem skin. It is a good moisturizer that makes skin hydrated. But manufacturers love it because of its strong soothing effect. It also exfoliates dead cells, stimulates recovery of your skin, and helps to protect the skin from the sun, frost, and similar negative impacts.

The component is researched very well and its soothing activity is confirmed by scientists. Used in concentration between 0.5-2%.

Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.

Lavandula Angustifolia (Lavender) Oil is known for ages. It has a pleasant scent but it's not the only great property of this component. It has great antiseptic and antibacterial activity which is great for oily skin. It also helps to heal small wounds and calm down the skin.

Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.

Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.

Sodium PCA is a nice moisturizer and skin softener. It contains amino acids and Sodium Hyaluronate. It’s part of the Natural Moisturizing Factor (NMF) that is responsible for keeping the outer layer of the skin hydrated. If you don’t have enough NMF you can face dryness even if you don’t have other skin problems.

Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.

Lactic Acid is the most popular and the least aggressive acid among all the AHAs. Unlike Salicylic and Glycolic acids which can irritate your skin, Lactic Acid will hardly cause any problems. The combination of its soft action and effectiveness makes it a real brilliant. It exfoliates dead cells, makes the skin tone even, clears pores, kills bacteria, moisturizes the skin and helps to keep water, helps the cells to produce Hyaluronic Acid. It also works as a strong antioxidant and anti-aging component.

It's a great acid for getting familiar with the world of AHAs. If you want to start using "fruit acids" but struggling for some reason, try to use Lactic Acid first. If your skin accepts it well, you can try stronger acids.

Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.

Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.

Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.

Allowed concentration: no more than 0,3% for European Union countries.

Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.

Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.

Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.

Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!

Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.

Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.

Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.

C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.

Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.

PEG-40 Hydrogenated Castor Oil helps ingredients to mix better. It has nice cleansing activity helping to remove sebum and dirt from the surface of your skin. It's also responsible for making soft foam in soaps, shower gels, etc. Despite it having "PEG" in the title, it's considered to be safe.

Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.

Sodium Lactate is very effective for recovering the natural lipid layer of the skin. It’s safe and doesn’t provoke negative reactions. It provides a strong moisturizing effect. It’s a nice soothing ingredient.

Triethanolamine is a pH adjuster. It is a toxic component that can be absorbed by the skin and detected in blood later. It can be a dermal irritant. Though it's considered safe, you should think before using it in skincare. There are many products on the market without Triethanolamine.

Sodium Citrate is a water-soluble soft organic surfactant with strong stabilizing and conditioning effects. It helps to produce foam and lowers the negative impact of hard water on your skin and hair. It also helps to regulate the pH level of the product. It’s a natural ingredient and it’s safe for most people. It’s used in food (additive number E331).

Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.

Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.

It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.

Biotin is also known as Vitamin H or Vitamin B7. It is an amazing chemical, but only if you take it inside as a supplement. Will it work if you apply it to the skin? There is not enough scientific data that can prove its efficiency as a cosmetic component. But manufacturers say it can smooth the skin and improve the look of your hair.