Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
2
Octisalate (4.5%)
Roles: Fragrance
UV Protection
3
Octocrylene (2.7%)
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
4
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
5
Olea Europaea (Olive) OilAntioxidant
Roles: Skin conditioning, Fragrance
Moisturizing
Softening
Hair follicle nutrition
Malassezia unsafe
Comedogenic rating [ 2 ]
Olea Europaea (Olive) Oil is a great natural ingredient rich with Vitamin E and Vitamin A. It’s an antioxidant that helps to slower aging, recover elasticity and slower wrinkle forming. It makes the skin softer, smooth and lowers inflammation. In antient times people used Olive Oil for healing wounds.
6
Cetyl Ricinoleate
Roles: Skin conditioning, Emollient
Moisturizing
7
Butyrospermum Parkii (Shea) Butter
Roles: Skin conditioning, Viscosity controlling
UV Protection
Moisturizing
Anti-aging
Malassezia unsafe
Shea Butter is a great natural moisturizer everybody knows about. And it’s popular for a reason. It contains 5 essential fatty acids (palmitic, stearic, oleic, linoleic, and arachidonic), vitamins (A, D, E, F), and catechins, which are antioxidants. It moisturizes the skin and protects it from UV, cold, and other negative factors. It can be used on its own and will not harm your skin even in very high concentrations.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
9
PPG-51/Smdi Copolymer
10
Cetyl Esters
Roles: Skin conditioning, Emollient
Softening
11
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
16
Propanediol
Roles: Solvent, Viscosity controlling
Moisturizing
Hair conditioning
Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.
17
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
30
Trifluoroacetyl Tripeptide-2
Roles: Skin conditioning
Lifting
Elasticity improvement
Rejuvenation
31
Acetyl Hexapeptide-8
Roles: Skin conditioning
32
CaffeineAntioxidant
Roles: Skin conditioning, Fragrance, Masking
UV Protection
Anticellulite
Tones up skin
Hair growth stimulating
Good for dry skin
Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.
It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.
Avocado oil is a natural ingredient with an excellent rejuvenating and moisturizing effect. It's so effective because it contains a lot of squalene - a very strong chemical that protects the skin and helps to keep it hydrated. It's also a nice antioxidant that helps to slower aging. Avocado oil also contains different vitamins (A, B, E), lecithin, and beta-carotene.
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
37
Ethylhexyl Hydroxystearate
Roles: Emollient
Softening
38
Tricontanyl Pvp
Roles: Film former, Humectant, Viscosity controlling
39
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
40
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
41
Trehalose
Roles: Flavoring, Humectant, Moisturising
Moisturizing
Softening
42
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
43
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
Roles: Emulsion stabilizer, Film former, Viscosity controlling
AcrylatesC10-30 Alkyl Acrylate Crosspolymer is a synthetic non-toxic gel used mostly for formulation purposes. It helps manufacturers to achieve the necessary texture of the product (it makes the product thicker). It also has sight healing and antistatic activity.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
51
Zinc PCA
Roles: Skin conditioning, Humectant
52
Simethicone
53
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
54
Polysorbate 80
Roles: Emulsifying, Fragrance, Surfactant
Malassezia unsafe
Polysorbate 80 is a formulation component. It helps the components to mix better and makes the product feel smooth on the skin.
55
Yeast Extract\faex\extrait De Levure
56
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
58
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
Hexylene Glycol is mostly used for formulation purposes. It’s a good surfactant, emulsifier, and viscosity-reducing agent. It maintains the density of the formulation of the product preventing it from separating. It also makes the product feel better.
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
65
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
66
Sodium Dehydroacetate
Roles: Preservative
67
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
68
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
69
FD&C Red No. 4 (Ci 14700)
Roles: Colorant
70
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
71
FD&C Yellow 5 (Ci 19140)
Roles: Colorant
72
Please Be Aware That Ingredient Lists May Change Or Vary From Time To Time
73
Please Refer To The Ingredient List On The Product Package You Receive For The Most Up To Date List Of Ingredients