Estée LauderDaywear Sheer Tint Release SPF 15 GezichtscrèmeIngredients

Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.

There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.

Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.

Green Tea Leaf Extract is a great antioxidant often used in Korean skincare products. It contains EGCG - the most effective flavonoid. It makes the skin look fresh, fills it with vitamines, and helps to prevent aging. It also helps to lower inflammation.

Rosmarinus Officinalis (Rosemary) Leaf Extract is an organic herbal extract derived from Rosemary. It contains a lot of useful chemicals like rosmarinic acid, caffeic acid, betulinic acid, carnosic acid, ursolic acid, carnosol, and camphor. These chemicals help the ingredient to lower inflammation, kill bacteria and fungus, and decrease pain. It’s a great antioxidant to counter signs of aging. It helps tighten the skin and improves elasticity. It also helps to get rid of small wrinkles and fine lines.

Maltodextrin is an organic sugar derived from corn, rice, or potato. It is a multipurpose ingredient. It is a skin softener, absorbent, and film-forming agent. But mostly it’s used because of its viscosity-controlling effect. It makes the product feel even. It is ruled safe by CIR for use in cosmetics.

Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.

Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.

Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.

Squalane is a more stable equivalent of Squalene. It is a very important component of our skin. It’s a major part of natural sebum that forms a protection barrier on the skin's surface. If the barrier isn’t strong enough, your skin will become more sensitive. Squalane helps to keep skin hydrated, protects it from the negative impact of the environment, lowers irritation, stimulates regeneration, and removes dryness. It is accepted by our skin very well and will not cause allergic reactions.

Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.

Sodium PCA is a nice moisturizer and skin softener. It contains amino acids and Sodium Hyaluronate. It’s part of the Natural Moisturizing Factor (NMF) that is responsible for keeping the outer layer of the skin hydrated. If you don’t have enough NMF you can face dryness even if you don’t have other skin problems.

Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.

It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.

Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.

Stearyl Alcohol creates a barrier on the skin's surface lowering the evaporation of water and making it hydrated for a longer time. This barrier helps the skin to recover after deep cleansing. It also makes the skin look smooth. Though it belongs to alcohols, it's a fatty alcohol and it doesn't make your skin dry.

Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.

Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.

Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".

Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.

Benzyl Salicylate is a fragrance component with a pleasant flower odor. It can be an allergy trigger and should be used carefully. Pay attention to this ingredient in a formulation if you have sensitive skin or if you have an allergy.

Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.

Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.

Sorbic Acid is a very effective synthetic preservative that is used even in food. It’s considered to be safe for use in cosmetic products. It’s great for increasing the shelf life of a product.

Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.

Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.

Allowed concentration: no more than 0,3% for European Union countries.

Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.

Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.

Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.

The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.

Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.