Zinc Oxide is a great physical sunscreen, meaning it deflects the UV rays. It’s the only natural mineral sun protector recommended by the FDA for babies. It’s good for sensitive skin because it’s less irritating than chemical sunscreens.
It has very nice spectrum protection. It helps to protect from UVA I, UVA II, and UVB and nowadays it’s the broadest range of sunscreen used in cosmetics. In other words, it’s brilliant in its league.
The negative side is that it can feel heavy on the skin. It can leave a slight whitish tint on the surface of the skin and some people may not like this. Keep in mind that it’s relatively easy to wash off, so it’s better to use water-resistant sunscreens if you are swimming.
2
Titanium Dioxide (2%)
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
3
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.
It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.
8
Methyl Glucose Sesquistearate
Roles: Skin conditioning, Emollient, Emulsifying
Softening
Malassezia unsafe
9
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
10
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
11
PEG-20 Methyl Glucose Sesquistearate
Roles: Emollient, Emulsifying, Surfactant
Softening
PEG
12
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
13
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Squalane is a more stable equivalent of Squalene. It is a very important component of our skin. It’s a major part of natural sebum that forms a protection barrier on the skin's surface. If the barrier isn’t strong enough, your skin will become more sensitive. Squalanehelps to keep skin hydrated, protects it from the negative impact of the environment, lowers irritation, stimulates regeneration, and removes dryness. It is accepted by our skin very well and will not cause allergic reactions.
23
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
24
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.
28
Pullulan
Roles: Binding, Film former
29
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
30
Polysorbate-60
Roles: Emulsifying, Fragrance, Surfactant
Soothing
Antiseptic
Malassezia unsafe
Polysorbate-60 is an emulsifier, foam stabilizer, and surfactant. It’s considered to be safe but if the product contains PEG ingredients, Polysorbate may produce 1,4-Dioxane which can be harmful to your health.
31
Ethylene/Methacrylate Copolymer
Roles: Film former
32
Sorbitan Oleate
Roles: Emulsifying, Fragrance, Surfactant
Softening
Malassezia unsafe
Comedogenic rating [ 3 ]
Bad for oily skin
33
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
34
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
