Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
2
Homosalate (12.5%)
Roles: Skin conditioning, Fragrance
UV Protection
3
Octisalate (5%)
Roles: Fragrance
UV Protection
4
Octocrylene (8%)
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
5
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
8
Isododecane
Roles: Emollient, Fragrance, Solvent
Softening
Isododecane is an emollient and a good base for colorants. Very often used in powders and shades because it spreads on the skin nicely. It also helps to soften the skin and helps to lower water loss making all the moisturizing components work better.
Sorbitol is usually used for making different gels. It helps the product to keep water and it helps to deliver active components deeper into the skin. It is a moisturizing and soothing component. It is usually accepted well by all skin types.
10
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Niacinamide is a form of Vitamin B3 and it’s a superman in cosmetics. This ingredient is researched very well. It has a lot of positive reviews from scientists and experts. It's very important for healthy skin. The lack of this vitamin can cause dryness, itching, and sun sensitivity. The component removes small wrinkles and fine lines, heals wounds, and prevents the forming of cancer cells. It also makes the skin tone even by removing dark spots. It increases ceramide synthesis which increases the overall health of your skin. It fights acne and lowers pores.
Researches say that 4-5% of Niacinamide is the most effective concentration for skincare use.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
15
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
16
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
17
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
18
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
19
Ceteareth-20
Roles: Cleansing, Surfactant
Softening
Comedogenic rating [ 2 ]
20
Phenylethyl ResorcinolAntioxidant
Lightening
21
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
22
Fatty Acid Ethoxylate
23
Sorbitan Stearate
Roles: Emulsifying, Fragrance, Surfactant
Softening
Malassezia unsafe
24
Synthetic Fluorphlogopite
Roles: Bulking, Viscosity controlling
25
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
26
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
27
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
28
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
