Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
4
PEG-12 Glyceryl Dimyristate
Roles: Skin conditioning
PEG
5
Vitis Vinifera (Grape) Seed OilAntioxidant
Roles: Skin conditioning, Emollient
Elasticity improvement
Nutrifying
Good for oily skin
Vitis Vinifera (Grape) Seed Oil is a very strong antioxidant and it's a very valuable skincare component. It's great for treating acne. It helps to deliver vitamins into the deep layers of your skin. It improves elasticity and helps to treat wrinkles.
6
Prunus Amygdalus Dulcis (Sweet Almond) Oil
Roles: Skin conditioning, Fragrance
UV Protection
Moisturizing
Softening
Soothing
Hair strengthening
Hair growth stimulating
Malassezia unsafe
Good for dry skin
Bad for oily skin
Sweet Almond Oil is rich in Vitamin D, Vitamin E, and different minerals. It’s a very effective soothing component known from ancient times. It helps to protect the skin from the sun, make it softer and heal small wounds.
Cocos Nucifera (Coconut) Oil protects the skin from dryness. It’s a very effective organic moisturizer. In hair care, it creates a protective film around hair protecting it. It has slight comedogenic activity, meaning the product may clog pores if there is too much Coconut oil in it.
9
Gardenia Taitensis Flower Extract
10
Argania Spinosa (Argan) Kernel OilAntioxidant
Roles: Skin conditioning, Emollient
Moisturizing
Softening
Soothing
Elasticity improvement
Rejuvenation
Tones up skin
Regeneration
This oil consists of Olein and Linoleic acids mostly. It also contains a lot of Tocopherol. That's why it's a great component to counter ageing. It soaks into the skin pretty fast without leaving an oily film. It makes the skin feel silky and helps to recover hydro-lipid layer, increases its firmness and elasticity.
11
Carthamus Tinctorius (Safflower) OilAntioxidant
Roles: Skin conditioning, Fragrance, Masking
Moisturizing
Softening
Nutrifying
Protection
Hair conditioning
Hair follicle nutrition
Carthamus Tinctorius (Safflower) Oil is a very nice conditioner. It contains Linoleic acid and Vitamin E, and your skin will accept this component with great pleasure. It’s a lightweight oil that doesn’t leave heavy feeling. It’s a good moisturizer for dry or acne-prone skin. It lowers irritation and inflammation. It is accepted by any type of skin, even by sensitive.
12
Hydroxypropyltrimonium Hydrolyzed Corn Starch
Roles: Antistatic, Film former, Hair conditioning
Hair conditioning
13
Hydrolyzed Vegetable Protein Pg-Propyl Silanetriol
Roles: Skin conditioning, Hair conditioning
Moisturizing
Hair strengthening
Hair structure improvement
14
Hydrolyzed Wheat Protein Pg-Propyl Silanetriol
Roles: Skin conditioning, Hair conditioning
Hair conditioning
Hair gloss
Hair protection
15
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
17
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Cetrimonium Chloride is used mostly for formulation purposes and doesn't provide any strong skincare effects. Used mostly to help mix different components together. It also helps to increase the shelf life of the product. CIR safety report tells that this ingredient was found to be “…safe for use in rinse‐off products and …safe for use at concentrations of up to 0.25% in leave‐on products.”
In the European Union (EU), cetrimonium chloride and steartrimonium chloride were reported to be used as a preservative at up to 0.1%. They are also used in rinse-off hair care products at up to 2.5%, leave-on hair products at up to 1.0%, and in leave-on facial cream products at up to 0.5%.
22
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
23
Ethylhexyl Methoxycinnamate
24
Sodium Chloride
Roles: Flavoring, Viscosity controlling
Antiseptic
Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.
25
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
26
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
27
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
28
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
29
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
30
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
31
Potassium Sorbate
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.
32
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.