Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
2
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
3
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
6
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
9
Ceteareth-18
10
Polyacrylamide
Roles: Antistatic, Binding, Film former, Hair fixative
Antistatic
Protection
11
C13-14 Isoparaffin
Roles: Emollient, Solvent
12
Laureth-7
Roles: Emulsifying, Surfactant
Cleansing
13
Butyrospermum Parkii (Shea) Butter
Roles: Skin conditioning, Viscosity controlling
UV Protection
Moisturizing
Anti-aging
Malassezia unsafe
Shea Butter is a great natural moisturizer everybody knows about. And it’s popular for a reason. It contains 5 essential fatty acids (palmitic, stearic, oleic, linoleic, and arachidonic), vitamins (A, D, E, F), and catechins, which are antioxidants. It moisturizes the skin and protects it from UV, cold, and other negative factors. It can be used on its own and will not harm your skin even in very high concentrations.
14
Ethylhexyl Stearate
Roles: Emollient
Softening
15
Ethylhexyl Methoxycinnamate
16
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
19
Dimethiconol
Roles: Antifoaming, Emollient, Moisturising
Protection
Hair conditioning
Hair gloss
Silicones
20
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Dipropylene Glycol is a solvent, emulsifier, viscosity decreasing, and masking agent. It helps to extract useful chemicals from plants and leaves, making natural components in a product more effective. It also helps to hydrate the skin. Considered safe for health and doesn't irritate the skin in common concentration.
Propylene Glycol is a useful componet with many positive effects. It’s a very good moisturizer. It helps to deliver ingredients into deeper layers of the skin. It creates a protective layer on the skin preventing water loss. The component is researched very well and doesn’t have notable side effects. It’s used even for making food.
23
Decyl Glucoside
Roles: Cleansing, Emulsion stabilizer, Surfactant
Cleansing
Decyl glucoside is a surfactant. It provides degreasing and wetting effects. It removes dirt and sebum gently. It doesn’t irritate the skin but at the same time, it’s an effective cleanser. It’s considered to be the safest among all the other surfactants.
24
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
26
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
27
Dmdm Hydantoin (Formaldehyde Releaser)
Roles: Preservative
28
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
29
Methylparaben
Roles: Fragrance, Preservative
Parabens
Methylparaben is an effective preservative. It is a controversial ingredient in terms of safety. In 2006 there was a laboratory test showed that this component can increase the sun sensitivity of the skin cells. That’s why it’s a good idea to use sunscreen after you use this component.
30
Ethylparaben
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Parabens
31
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
32
Lilial
Roles: Fragrance, Masking
Allergens
33
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
34
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
35
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.