Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
3
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
4
Propylene Glycol Dicaprylate/Dicaprate
Roles: Skin conditioning, Emollient
Softening
Hair conditioning
5
Pentylene Glycol
Roles: Skin conditioning, Solvent
Moisturizing
Hair conditioning
Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.
6
Ethylhexyl Palmitate
Roles: Emollient, Fragrance
Softening
Hair conditioning
Malassezia unsafe
Comedogenic rating [ 4 ]
Bad for oily skin
7
PEG-30 Dipolyhydroxystearate
Roles: Emulsifying, Surfactant
Softening
Malassezia unsafe
PEG
8
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
9
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
10
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
11
Talc
Roles: Abrasive, Anticaking, Bulking
UV Protection
Softening
Comedogenic rating [ 1 ]
12
Caprylic/Capric Triglyceride
Roles: Skin conditioning, Fragrance
Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.
It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.
13
Hdi/Trimethylol Hexyllactone Crosspolymer
Roles: Anticaking
14
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
Stearic Acid doesn’t belong to aggressive acids. It’s a fatty acid that can be found in Shea Butter, Cocoa Butter, and many natural butters and oils. The component is mostly used for formulation purposes. It makes the product spread and feel better. It’s one of the most important fatty acids in our skin cells.
26
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
Rosmarinus Officinalis (Rosemary) Leaf Extract is an organic herbal extract derived from Rosemary. It contains a lot of useful chemicals like rosmarinic acid, caffeic acid, betulinic acid, carnosic acid, ursolic acid, carnosol, and camphor. These chemicals help the ingredient to lower inflammation, kill bacteria and fungus, and decrease pain. It’s a great antioxidant to counter signs of aging. It helps tighten the skin and improves elasticity. It also helps to get rid of small wrinkles and fine lines.
32
Helianthus Annuus Seed Oil
33
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
34
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
35
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
36
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
37
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
