Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
2
Sodium Laureth Sulfate
Roles: Cleansing, Emulsifying, Surfactant
Cleansing
Comedogenic rating [ 3 ]
Sulfates
Bad for dry skin
3
Acrylates Copolymer
Roles: Antistatic, Binding, Film former, Hair fixative
Cocamidopropyl Betaine is a pH 4.5-5.5 liquid that is used to improve the overall efficiency of the formulation. It’s usually combined with different surfactants and is used because of its cleansing efficiency. It helps to remove sebum and dirt from the skin and hair. It also works as a foaming agent helping to make a pleasant foam.
5
Sodium Chloride
Roles: Flavoring, Viscosity controlling
Antiseptic
Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.
6
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
7
PEG-150 Distearate
Roles: Cleansing, Surfactant
Comedogenic rating [ 2 ]
PEG
8
Sodium Benzoate
Roles: Fragrance, Masking, Preservative
Antifungal
Antiseptic
Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.
9
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
12
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
13
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
PEG-40 Hydrogenated Castor Oil helps ingredients to mix better. It has nice cleansing activity helping to remove sebum and dirt from the surface of your skin. It's also responsible for making soft foam in soaps, shower gels, etc. Despite it having "PEG" in the title, it's considered to be safe.
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
Propylene Glycol is a useful componet with many positive effects. It’s a very good moisturizer. It helps to deliver ingredients into deeper layers of the skin. It creates a protective layer on the skin preventing water loss. The component is researched very well and doesn’t have notable side effects. It’s used even for making food.
23
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
24
Ethylhexyl Salicylate
25
Honey Extract
Roles: Skin conditioning, Humectant, Moisturising
26
Menthol
Roles: Flavoring, Fragrance, Masking
Good for oily skin
27
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
28
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
29
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
30
FD&C Yellow 5 (Ci 19140)
Roles: Colorant
31
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
