Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
2
Homosalate (10%)
Roles: Skin conditioning, Fragrance
UV Protection
3
Octinoxate (7%)
UV Protection
Octinoxate is an effective sun protector that absorbs UV-B rays mostly. That means it can help to protect the skin from burns and from cancer. It’s also a solvent for other sunscreen components. This helps manufacturers to make products less oily.
4
Octisalate (5%)
Roles: Fragrance
UV Protection
5
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
8
Isododecane
Roles: Emollient, Fragrance, Solvent
Softening
Isododecane is an emollient and a good base for colorants. Very often used in powders and shades because it spreads on the skin nicely. It also helps to soften the skin and helps to lower water loss making all the moisturizing components work better.
9
Propanediol
Roles: Solvent, Viscosity controlling
Moisturizing
Hair conditioning
Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.
10
Polyester-8
11
Cetyl Esters
Roles: Skin conditioning, Emollient
Softening
12
Nylon-12
Roles: Bulking, Viscosity controlling
13
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
14
Diisopropyl Sebacate
Roles: Skin conditioning, Emollient, Solvent
Softening
Hair conditioning
15
Isodecyl Neopentanoate
Roles: Skin conditioning, Emollient
Softening
Hair conditioning
16
Lauryl Lactate
Roles: Skin conditioning, Emollient, Fragrance
Cleansing
17
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
Chlorphenesin is a popular preservative. It doesn’t provide any skin-related positive effects and is used to prevent bacterial growth inside a product. It’s a weak preservative but works much better with silicones.
Allowed concentration: no more than 0,3% for European Union countries.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
27
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Roles: Emulsion stabilizer, Film former, Viscosity controlling
AcrylatesC10-30 Alkyl Acrylate Crosspolymer is a synthetic non-toxic gel used mostly for formulation purposes. It helps manufacturers to achieve the necessary texture of the product (it makes the product thicker). It also has sight healing and antistatic activity.
28
Argania Spinosa (Argan) Kernel OilAntioxidant
Roles: Skin conditioning, Emollient
Moisturizing
Softening
Soothing
Elasticity improvement
Rejuvenation
Tones up skin
Regeneration
This oil consists of Olein and Linoleic acids mostly. It also contains a lot of Tocopherol. That's why it's a great component to counter ageing. It soaks into the skin pretty fast without leaving an oily film. It makes the skin feel silky and helps to recover hydro-lipid layer, increases its firmness and elasticity.
29
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
30
Elaeis Guineensis (African Oil Palm) Oil
Roles: Skin conditioning, Emollient
31
Tocotrienols
Roles: Skin conditioning
32
Caprylic/Capric Triglyceride
Roles: Skin conditioning, Fragrance
Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.
It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
44
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
45
TocopherolAntioxidant
Roles: Skin conditioning, Fragrance
UV Protection
Anti-aging
Regeneration
Comedogenic rating [ 3 ]
Good for dry skin
Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!
46
Citral
Roles: Flavoring, Fragrance, Masking
Allergens
Citral is a fragrance component responsible for a fresh citrus scent. It’s used as a masking agent to hide unpleasant aromas. Unfortunately, it’s considered to be an allergen and it is one of the 26 fragrances that have to be labeled separately in the European Union. Pay attention to this component if you have sensitive skin.
47
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
48
Sodium Chloride
Roles: Flavoring, Viscosity controlling
Antiseptic
Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.
49
Potassium Thiocyanate
Roles: Stabilising
50
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
51
Eugenol
Roles: Fragrance, Masking
Allergens
Eugenol is a fragrance and one of the ingredients you should use carefully. It is in the list of 26 European Union fragrances that have to be labeled separately because of allergen potential. Laboratory studies show that the component is cytotoxic even at low concentrations. But no studies were performed on humans. In general, it's not the best skincare component.
52
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
53
Hippophae Rhamnoides (Sea Buckthorn) Fruit Extract
Roles: Skin conditioning, Masking
54
Maltodextrin
Roles: Skin conditioning, Binding, Emulsion stabilizer, Film former, Hair conditioning
Maltodextrin is an organic sugar derived from corn, rice, or potato. It is a multipurpose ingredient. It is a skin softener, absorbent, and film-forming agent. But mostly it’s used because of its viscosity-controlling effect. It makes the product feel even. It is ruled safe by CIR for use in cosmetics.
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.