Free from: Allergens, Drying alcohols, Chemical fragrances, Parabens, Sulfates, Petroleum-based,
INCI - Full Breakdown
1
Octisalate (4.9%)
Roles: Fragrance
UV Protection
2
Octocrylene (9.5%)
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
3
Zinc Oxide (5.4%)
Roles: Bulking, Colorant
UV Protection
Antiseptic
Comedogenic rating [ 1 ]
Good for oily skin
Zinc Oxide is a great physical sunscreen, meaning it deflects the UV rays. It’s the only natural mineral sun protector recommended by the FDA for babies. It’s good for sensitive skin because it’s less irritating than chemical sunscreens.
It has very nice spectrum protection. It helps to protect from UVA I, UVA II, and UVB and nowadays it’s the broadest range of sunscreen used in cosmetics. In other words, it’s brilliant in its league.
The negative side is that it can feel heavy on the skin. It can leave a slight whitish tint on the surface of the skin and some people may not like this. Keep in mind that it’s relatively easy to wash off, so it’s better to use water-resistant sunscreens if you are swimming.
Betaine is used a lot in “organic” skincare products. It is a good moisturizer that not only hydrates the skin but also strengthens the cell membrane. This helps to lower the water loss over time. It also softens the skin and reduces irritation and redness. It’s often used at a 3-5% concentration depending on the product.
6
Bisabolol
Roles: Skin conditioning, Fragrance, Masking
Softening
Soothing
Lightening
Healing
Antiseptic
Protection
Bisabolol is one of the most effective healing ingredients in cosmetics. It is a great component for reducing inflammation. It contains a lot of Vitamin B5 known as Panthenol, but it acts much better than Panthenol due to its wider effectiveness. It softens the skin and helps to recover skin cells after dryness. It is also a nice protector – it helps to protect the skin from aggressive chemical and physical impact. Bisabolol, Panthenol, and Allantoin are the true saviors and very often you can find all these 3 components mixed in a product for better efficiency.
Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.
It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
15
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
16
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
23
Polyisobutene
Roles: Binding, Film former, Viscosity controlling
24
Potassium Sorbate
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.
25
Propanediol
Roles: Solvent, Viscosity controlling
Moisturizing
Hair conditioning
Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.
26
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Sodium PCA is a nice moisturizer and skin softener. It contains amino acids and Sodium Hyaluronate. It’s part of the Natural Moisturizing Factor (NMF) that is responsible for keeping the outer layer of the skin hydrated. If you don’t have enough NMF you can face dryness even if you don’t have other skin problems.
28
Sorbitan Olivate
Roles: Emulsifying, Surfactant
Softening
Malassezia unsafe
29
Tetradecane
Roles: Fragrance
30
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
