Free from: Drying alcohols, Chemical fragrances, Parabens, Sulfates, Coconut, Petroleum-based,
INCI - Full Breakdown
1
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
Butylene Glycol is a very popular synthetic alcohol. It helps the product to absorb deeper and faster. It is also a solvent for other ingredients. As for the skin benefits, it helps to attract water and helps to make the skin softer.
4
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.
Cetyl Alcohol is a fatty alcohol. It’s responsible for making your skin soft and improving product thickness. It makes the product easier to apply and feel richer. Though it contains the word “Alcohol” in its title, the component doesn’t belong to harmful alcohols. That’s why a product with this component can still be marked as Alcohol-free. Usually, manufacturers receive this component from coconut or palm oil.
6
Zinc Oxide
Roles: Bulking, Colorant
UV Protection
Antiseptic
Comedogenic rating [ 1 ]
Good for oily skin
Zinc Oxide is a great physical sunscreen, meaning it deflects the UV rays. It’s the only natural mineral sun protector recommended by the FDA for babies. It’s good for sensitive skin because it’s less irritating than chemical sunscreens.
It has very nice spectrum protection. It helps to protect from UVA I, UVA II, and UVB and nowadays it’s the broadest range of sunscreen used in cosmetics. In other words, it’s brilliant in its league.
The negative side is that it can feel heavy on the skin. It can leave a slight whitish tint on the surface of the skin and some people may not like this. Keep in mind that it’s relatively easy to wash off, so it’s better to use water-resistant sunscreens if you are swimming.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
9
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
12
Ethylhexyl Salicylate
13
Polyethylene
Roles: Abrasive, Binding, Bulking, Emulsion stabilizer, Film former, Viscosity controlling
Cleansing
Softening
14
PEG-100 Stearate
Roles: Cleansing, Surfactant
Moisturizing
Softening
Malassezia unsafe
PEG
Peg-100 Stearate is a good emulsifier that makes the ingredients mix nicely. It also makes the skin soft and moisturized. Peg-100 Stearate is also known for its cleansing effect. CIR Expert Panel marked this ingredient as safe.
15
Hydrogenated Lecithin
Roles: Skin conditioning, Emulsifying, Surfactant
Softening
16
Citrus Limon (Lemon) Peel Oil
17
Citrus Grandis (Grapefruit) Peel Oil
Roles: Skin conditioning, Fragrance, Masking
18
Mentha Spicata (Spearmint) Oil
19
Citrus Aurantium Dulcis (Orange) Peel Oil
20
Limonene
Roles: Fragrance
Antiseptic
Allergens
Limonene provides a nice and fresh citrus scent. It can be found in many plants. It's used in cosmetics because of its low price and pleasant smell.
21
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
22
Citral
Roles: Flavoring, Fragrance, Masking
Allergens
Citral is a fragrance component responsible for a fresh citrus scent. It’s used as a masking agent to hide unpleasant aromas. Unfortunately, it’s considered to be an allergen and it is one of the 26 fragrances that have to be labeled separately in the European Union. Pay attention to this component if you have sensitive skin.
Citrus Aurantium Amara (Bitter Orange) Flower Water
Roles: Skin conditioning, Fragrance
29
Laminaria Saccharina Extract
Roles: Fragrance
30
Triticum Vulgare (Wheat) Germ Extract
Roles: Skin conditioning, Skin bleaching
31
Adenosine Phosphate
Roles: Skin conditioning
32
Pantethine
Roles: Emollient, Hair conditioning
33
Creatine
Roles: Skin conditioning
34
Hordeum Vulgare (Barley) Extract\extrait D’orge
35
Folic Acid
Roles: Skin conditioning
Acne fighting
Soothing
Regeneration
Hair strengthening
36
Tourmaline
Roles: Viscosity controlling
37
Cordyceps Sinensis Extract
Roles: Skin conditioning, Emollient, Humectant
38
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
39
Acetyl Carnitine Hcl
Roles: Skin conditioning
40
CaffeineAntioxidant
Roles: Skin conditioning, Fragrance, Masking
UV Protection
Anticellulite
Tones up skin
Hair growth stimulating
Good for dry skin
Caffeine stimulates all the processes inside skin cells. It's very effective for reducing swelling on the face (especially great for under the eyes area). The effectiveness depends on the concentration, the more component you apply the better the effect will be.
It also tones up the skin making it look younger. It's great for dry skin because it stimulates the synthesis of cholesterol, a chemical that helps to form a protective layer on the surface of the epidermis.
41
Rhodochrosite
Roles: Skin conditioning
42
Sodium Hyaluronate
Roles: Skin conditioning, Humectant
Moisturizing
Softening
Anti-aging
Rejuvenation
Good for dry skin
Sodium Hyaluronate is an amazing component! It plays very important role in skin hydration process. It helps to maintain water balance and lower water loss. Scientists have found a direct dependence between the level of Sodium Hyaluronate in cells and skin aging. That's why this component is so much important. It must be in your routine if you want to have a healthy and fresh looking skin.
Some people think that Sodium Hyaluronate and Hyaluronic acid are different names of the same component, but it is not entirely correct. Hyaluronic acid is a different chemical but with similar effects. Actually, Sodium Hyaluronate is used in cosmetics much more often because it’s more stable and has much better resistance to oxidation.
Squalane is a more stable equivalent of Squalene. It is a very important component of our skin. It’s a major part of natural sebum that forms a protection barrier on the skin's surface. If the barrier isn’t strong enough, your skin will become more sensitive. Squalanehelps to keep skin hydrated, protects it from the negative impact of the environment, lowers irritation, stimulates regeneration, and removes dryness. It is accepted by our skin very well and will not cause allergic reactions.
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
52
Tocopheryl AcetateVitaminsAntioxidant
Roles: Skin conditioning
Softening
Nutrifying
Tocopheryl Acetate is a form of Vitamine E. It’s used as an alternative to Tocopherol because it is more stable in the formulation. It has all the positive effects of Tocopherol plus better stability. It’s a brilliant component. It conditions and nourishes the skin helping it to resist aging. It also helps to protect the skin from the sun. High concentrations of Tocopheryl Acetate can lead to irritation and allergic reactions.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Hexylene Glycol is mostly used for formulation purposes. It’s a good surfactant, emulsifier, and viscosity-reducing agent. It maintains the density of the formulation of the product preventing it from separating. It also makes the product feel better.
62
Polysorbate-60
Roles: Emulsifying, Fragrance, Surfactant
Soothing
Antiseptic
Malassezia unsafe
Polysorbate-60 is an emulsifier, foam stabilizer, and surfactant. It’s considered to be safe but if the product contains PEG ingredients, Polysorbate may produce 1,4-Dioxane which can be harmful to your health.
63
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
64
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
65
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
66
Iron Oxides (CI 77491
67
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
68
CI 77499)
69
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.