Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
2
Homosalate
Roles: Skin conditioning, Fragrance
UV Protection
3
Ethylhexyl Salicylate
4
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
Glycerin is one of the most outstanding and helpful skincare components. It's used in many skincare products because it works and provides notable results. It's one of the best moisturizers. Molecules of Glycerin can absorb water and deliver it into deep layers of the skin making it hydrated.
Alcohol Denatured is a great bacteria killer. Manufacturers often put it inside products to increase their shelf life.
7
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
10
Glyceryl Stearate SE
Roles: Emulsifying, Surfactant
Moisturizing
Softening
Comedogenic rating [ 3 ]
Bad for oily skin
Glyceryl Stearate SE is a nice moisturizing ingredient. It hydrates the upper layers of the skin and fills small wrinkles. In haircare products, it's used for making hair softer.
Panthenol is a proud member of a league of the best-performing components. It's a stable form of Vitamin B5 and is also known as Pro-Vitamin B5. It’s a very good and effective component for hydration, healing, and soothing irritated skin. It works so soft and gentle that it’s even recommended for people with skin problems like eczema.
In haircare products it’s used for protecting the fiber. It’s researched very well and doesn’t have any negative side effects.
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
18
Vp/Hexadecene Copolymer
Roles: Binding, Film former, Hair fixative, Viscosity controlling
19
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
22
Trisodium EDTA
Roles: Chelating
23
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Roles: Emulsion stabilizer, Film former, Viscosity controlling
AcrylatesC10-30 Alkyl Acrylate Crosspolymer is a synthetic non-toxic gel used mostly for formulation purposes. It helps manufacturers to achieve the necessary texture of the product (it makes the product thicker). It also has sight healing and antistatic activity.
24
Carbomer
Roles: Emulsion stabilizer, Gel forming, Viscosity controlling
Moisturizing
Carbomer is used for formulation purposes. It helps to control the viscosity and flow of a product. It’s considered safe but only if it’s well purified. Poorly purified carbomers may contain benzol which may lead to irritation.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
26
Cellulose Gum
Roles: Binding, Emulsion stabilizer, Film former, Fragrance, Masking, Viscosity controlling
27
Tetrasodium Iminodisuccinate
Roles: Chelating
28
Sodium Chloride
Roles: Flavoring, Viscosity controlling
Antiseptic
Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.
29
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
30
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
31
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
Benzyl Alcohol doesn’t belong to harmful alcohols and it will not dry your skin. It’s a stabilizing agent that prevents ingredients oxidization. Having this component in formulation the product will keep efficiency for a longer time. Benzyl Alcohol has a slight almond odor and is used as a fragrance ingredient very often.
33
Alpha-Isomethyl Ionone
Roles: Fragrance, Masking
Allergens
34
Citronellol
Roles: Fragrance, Masking
Allergens
Citronellol makes the product smell better. It’s one of the most frequently used fragrance ingredients in the world. It smells like a fresh cut of apple peel mixed with a citrus scent. It’s also used to enhance flower scent. It has slight anti-bacterial activity.
Beware! This component is in the list of potential allergens and can cause allergic contact dermatitis.
35
Methyl Benzoate
36
TocopherolAntioxidant
Roles: Skin conditioning, Fragrance
UV Protection
Anti-aging
Regeneration
Comedogenic rating [ 3 ]
Good for dry skin
Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!
37
BHTAntioxidant
Roles: Fragrance, Masking
BHT is a stabilizer and antioxidant. It helps to keep the product fresh for a long time, preventing the oxidization of components. It is stable even in high temperatures, that’s why it’s an essential component in some products. It also protects the skin from free radicals. As for safety, the component isn't researched very well. It’s considered to be safe in low concentrations. But there is still not enough scientific data collected.
38
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".