Aloe Barbadensis (Aloe Vera) Leaf Juice is a natural juice received from Aloe leaves. It has been used in cosmetics for hundreds of ages. Scientists have discovered that it contains more than 200 nutrients: minerals, amino acids, vitamins, and so on. It’s a good component for calming irritated skin. It also helps to heal wounds, helps the skin regenerate faster, improves collagen syncretization, tones up, and moisturizes the skin. It also provides a slight UV-filtering effect.
2
Octocrylene
UV Protection
Octocrylene is an organic chemical sunscreen. It protects against UVA and UVB rays that can damage your skin or even lead to melanoma. It also stabilizes other sunscreen ingredients in a formulation and increases the water resistance of a product. It is approved by the FDA in concentrations of up to 10%. It’s not a very effective component on its own, that’s why manufacturers combine it with other chemical sunscreens.
3
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
4
Tinosorb M
5
Tinosorb S
Roles: Skin conditioning, Hair conditioning
6
Avobenzone
UV Protection
Avobenzone is the only chemical UV-protection component with a broad spectrum coverage. It can help to block both UVA I and UVA II rays. It's safe and it is allowed to use at a 3% concentration in the USA and a 5% concentration in the EU countries.
There is one problem: avobenzone loses efficiency when exposed to the sun. If you are outside, it loses 36% of its ability to block UV rays an hour after application. That's why it's recommended to reapply sunscreen every 2 hours.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Cyclopentasiloxane is a fluid silicone. It’s non-greasy and doesn’t have any scent or color. It evaporates pretty fast which makes this ingredient essential when it comes to making products that have to dry quickly. It also gives a nice silky feeling when you apply the product to the skin and hair. It leaves a thin film that protects the skin after evaporation.
Cyclopentasiloxane is chemically neutral, meaning it doesn’t react with other components.
12
Coco-Caprylate/Caprate
Roles: Skin conditioning, Emollient
13
Pentylene Glycol
Roles: Skin conditioning, Solvent
Moisturizing
Hair conditioning
Pentylene Glycol is a great replacement for Propylene Glycol. It has very similar characteristics but it’s derived from plants (usually from corn). Natural cosmetics lovers will find this component very useful. It enhances the moisturizing effect of cosmetic products, improves the efficiency of preservatives and it’s an effective emulsifier. It’s approved by ECOCERT and COSMOS so it’s considered to be 100% safe and can be used in vegan products.
14
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
15
Decyl Glucoside
Roles: Cleansing, Emulsion stabilizer, Surfactant
Cleansing
Decyl glucoside is a surfactant. It provides degreasing and wetting effects. It removes dirt and sebum gently. It doesn’t irritate the skin but at the same time, it’s an effective cleanser. It’s considered to be the safest among all the other surfactants.
16
Ammonium Acryloyldimethyltaurate/vp Copolymer
17
Stearyl Dimethicone
Roles: Skin conditioning, Emollient
Moisturizing
Protection
Hair volumizing
Silicones
18
Fragrance
Roles: Deodorant, Fragrance, Masking
Fragrances
Fragrance is a mix of chemical ingredients (usually 20-30 chemicals but up to 200 sometimes) that help the product to smell better. It can hide many bad things. Synthetic fragrances may contain many different chemicals, but manufacturers don’t want to reveal each of them for some reason and hide them behind the word "Fragrance".
19
Octadecene
Roles: Solvent, Viscosity controlling
20
Disodium EDTA
Roles: Chelating, Viscosity controlling
Disodium EDTA is an emulsion stabilizer and chelating agent. It deactivates the metal ions preventing them from reacting with other active ingredients. It improves the stability of a cosmetic formula and keeps the product’s consistency, texture, and pH unchanged. It doesn’t have any skincare effects and is used for formulation purposes only.
21
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
Propylene Glycol is a useful componet with many positive effects. It’s a very good moisturizer. It helps to deliver ingredients into deeper layers of the skin. It creates a protective layer on the skin preventing water loss. The component is researched very well and doesn’t have notable side effects. It’s used even for making food.
23
Lilial
Roles: Fragrance, Masking
Allergens
24
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
26
Sodium Benzoate
Roles: Fragrance, Masking, Preservative
Antifungal
Antiseptic
Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.
27
Potassium Sorbate
Roles: Fragrance, Preservative
Antifungal
Antiseptic
Potassium Sorbate is a preservative that increases the shelf life of the product. It’s a great alternative to parabens. That's why manufacturers like to use this component. It is safe in concentration of up to 10% but it is used in cosmetics in amounts of 1% or even lower.
Lactic Acid is the most popular and the least aggressive acid among all the AHAs. Unlike Salicylic and Glycolic acids which can irritate your skin, Lactic Acid will hardly cause any problems. The combination of its soft action and effectiveness makes it a real brilliant. It exfoliates dead cells, makes the skin tone even, clears pores, kills bacteria, moisturizes the skin and helps to keep water, helps the cells to produce Hyaluronic Acid. It also works as a strong antioxidant and anti-aging component.
It's a great acid for getting familiar with the world of AHAs. If you want to start using "fruit acids" but struggling for some reason, try to use Lactic Acid first. If your skin accepts it well, you can try stronger acids.
29
Hexyl Cinnamal
Roles: Fragrance, Masking
Allergens
Hexyl Cinnamal is a fragrance component that gives the product pleasant cinnamon and light jasmine aroma. It’s also used to enhance other fragrances. It’s considered a skin sensitizer and manufacturers have to call out this component on an ingredient statement.
30
Citronellol
Roles: Fragrance, Masking
Allergens
Citronellol makes the product smell better. It’s one of the most frequently used fragrance ingredients in the world. It smells like a fresh cut of apple peel mixed with a citrus scent. It’s also used to enhance flower scent. It has slight anti-bacterial activity.
Beware! This component is in the list of potential allergens and can cause allergic contact dermatitis.
31
Linalool
Roles: Deodorant, Fragrance, Masking
Allergens
Linalool gives the product a nice and fresh lavender scent. It can be found in many essential oils. It oxidizes during air exposure and becomes allergenic. It can lead to irritation causing problems for people with sensitive skin. The threat is even higher if the product was opened several months ago. In such products, more Linalool is oxidized.
32
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
33
Geraniol
Roles: Fragrance, Masking
Allergens
Geraniol is a fragrance ingredient that gives product a nice rose scent. That’s why it’s used by many manufacturers. In addition to its pleasant scent, it also provides an antifungal effect increasing the shelf life of a product. There are several ways of obtaining this ingredient but all of them are chemical.