Zinc Oxide is a great physical sunscreen, meaning it deflects the UV rays. It’s the only natural mineral sun protector recommended by the FDA for babies. It’s good for sensitive skin because it’s less irritating than chemical sunscreens.
It has very nice spectrum protection. It helps to protect from UVA I, UVA II, and UVB and nowadays it’s the broadest range of sunscreen used in cosmetics. In other words, it’s brilliant in its league.
The negative side is that it can feel heavy on the skin. It can leave a slight whitish tint on the surface of the skin and some people may not like this. Keep in mind that it’s relatively easy to wash off, so it’s better to use water-resistant sunscreens if you are swimming.
2
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
3
Caprylic/Capric Triglyceride
Roles: Skin conditioning, Fragrance
Caprylic/Capric Triglyceride is an emollient that also hydrates the skin without leaving a fatty film. When applied, the component feels smooth and light. In haircare products, it’s also used for hydrating purposes. It makes hair silky, lowers tangling, and makes hair smooth.
It’s safe for most people, except for people with allergic reactions to coconut or palm oil because these oils are usually used for producing the component.
4
Propanediol
Roles: Solvent, Viscosity controlling
Moisturizing
Hair conditioning
Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.
Cetearyl Alcohol is used mostly for formulation purposes. It’s a very good emulsifier and emulsion stabilizer. It helps the ingredients mix better and it makes the product spread on your skin evenly. It also makes the product thicker. It doesn’t belong to harmful alcohols and it will not dry your skin.
Betaine is used a lot in “organic” skincare products. It is a good moisturizer that not only hydrates the skin but also strengthens the cell membrane. This helps to lower the water loss over time. It also softens the skin and reduces irritation and redness. It’s often used at a 3-5% concentration depending on the product.
14
Mica
Roles: Colorant
Mica is a natural mineral used in cosmetics because of its beautiful and shiny appearance. It’s used in powders, highlighters, and other makeup products. It’s absolutely neutral to our skin and will not cause any skin-related problems.
15
Musa Sapientum (Banana) Leaf/trunk Extract
16
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
Xanthan Gum is used as a thickener or rheology modifier and emulsion stabilizer. It doesn’t provide any notable skin-related effects and is used mostly for formulation purposes. It makes the product’s texture smooth and even. It’s a naturally-derived thickener. Notable fact: it can also be found in the food you eat every day, so it is 100% safe.
Lecithin is a great emulsifier. It also has slight antioxidant activity, but it’s not enough if you are looking for a strong and effective anti-oxidant. Our skin cells contain Lecithin and that’s why this component will hardly cause any problems or negative reactions. It soaks in pretty fast and it’s accepted by skin cells very well.
24
Polyglyceryl-3 Lactate/Laurate
25
Polyglycerin-3
Roles: Humectant
26
Bisabolol
Roles: Skin conditioning, Fragrance, Masking
Softening
Soothing
Lightening
Healing
Antiseptic
Protection
Bisabolol is one of the most effective healing ingredients in cosmetics. It is a great component for reducing inflammation. It contains a lot of Vitamin B5 known as Panthenol, but it acts much better than Panthenol due to its wider effectiveness. It softens the skin and helps to recover skin cells after dryness. It is also a nice protector – it helps to protect the skin from aggressive chemical and physical impact. Bisabolol, Panthenol, and Allantoin are the true saviors and very often you can find all these 3 components mixed in a product for better efficiency.
27
TocopherolAntioxidant
Roles: Skin conditioning, Fragrance
UV Protection
Anti-aging
Regeneration
Comedogenic rating [ 3 ]
Good for dry skin
Tocopherol is one of the most popular active ingredients in cosmetics. It’s a brilliant component. It's a form of Vitamin E and it does help the skin and hair a lot. It conditions the skin, strengthens its barrier, protects it against harm, and makes the tone even. It also helps your skin and hair to resist the sun. It’s safe but can irritate sensitive skin sometimes. Pay attention to concentration!
Behenyl Alcohol is an emulsifier. It makes the product feel softer and more pleasant to touch. It also provides an anti-inflammation effect. Made of natural ingredients and can be seen in organic products a lot.
29
Caprylhydroxamic Acid
30
Sodium Dilauramidoglutamide Lysine
31
Citric AcidAntioxidantAHA
Roles: Buffering, Chelating, Fragrance, Masking
Cleansing
Exfoliating
Soothing
Lightening
Lifting
Hair growth stimulating
Citric Acid is one of the AHAs and it is a super useful component! It’s a great antioxidant. It acts as a soft peeling that removes dead cells and kills bacteria. It becomes even more effective if used with other cosmetic acids. Combined formulations are more active, but can irritate sensitive skin if used too often. The component can also whiten the skin and remove dark areas.
It can be an irritator due to its naturally lower pH level of 2.2. But manufacturers also use it as a pH adjuster so in most cases you will not have any issues.
Niacinamide is a form of Vitamin B3 and it’s a superman in cosmetics. This ingredient is researched very well. It has a lot of positive reviews from scientists and experts. It's very important for healthy skin. The lack of this vitamin can cause dryness, itching, and sun sensitivity. The component removes small wrinkles and fine lines, heals wounds, and prevents the forming of cancer cells. It also makes the skin tone even by removing dark spots. It increases ceramide synthesis which increases the overall health of your skin. It fights acne and lowers pores.
Researches say that 4-5% of Niacinamide is the most effective concentration for skincare use.
35
Maltodextrin
Roles: Skin conditioning, Binding, Emulsion stabilizer, Film former, Hair conditioning
Maltodextrin is an organic sugar derived from corn, rice, or potato. It is a multipurpose ingredient. It is a skin softener, absorbent, and film-forming agent. But mostly it’s used because of its viscosity-controlling effect. It makes the product feel even. It is ruled safe by CIR for use in cosmetics.
36
Sodium Citrate
Roles: Buffering, Chelating, Masking
Sodium Citrate is a water-soluble soft organic surfactant with strong stabilizing and conditioning effects. It helps to produce foam and lowers the negative impact of hard water on your skin and hair. It also helps to regulate the pH level of the product. It’s a natural ingredient and it’s safe for most people. It’s used in food (additive number E331).
37
Sodium Phytate
Roles: Chelating
38
Terminalia Ferdinandiana (Kakadu Plum) Extract
39
Lactobacillus Ferment
Roles: Skin conditioning
40
Tin Oxide
Roles: Abrasive, Bulking, Viscosity controlling
41
Glucose
Roles: Skin conditioning, Flavoring, Humectant
Moisturizing
Elasticity improvement
Nutrifying
42
Leuconostoc/Radish Root Ferment Filtrate
Roles: Antidandruff, Antimicrobial
Radish Root Ferment Filtrate is a 100% natural preservative. It's not as strong as its chemical alternatives, but it can be used in organic products.
43
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
44
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
45
Titanium Dioxide
Roles: Colorant
UV Protection
Titanium Dioxide is a very effective sunscreen. It belongs to physical sunscreens, meaning it reflects the UV rays like a mirror. The component is a mineral with white color. That’s why it’s also used in different powders as a pigment or brightener.
The component can be both safe and unsafe. It’s reported to be possibly carcinogenic to humans when inhaled. That’s why we don’t recommend using products where TiO2 is used in the form of powder and can be inhaled.
Sometimes it can be a nanoparticle. We recommend avoiding this form because it’s not researched well enough. A safer option is to use a non-nano form.