Colorscience Sunforgettable Total Protection Face Shield Classic SPF 50 is a product with 38 ingredients. Contains: Vitamins - Niacinamide; Antioxidant - Niacinamide, Dimethylmethoxy Chromanol;
Zinc Oxide is a great physical sunscreen, meaning it deflects the UV rays. It’s the only natural mineral sun protector recommended by the FDA for babies. It’s good for sensitive skin because it’s less irritating than chemical sunscreens.
It has very nice spectrum protection. It helps to protect from UVA I, UVA II, and UVB and nowadays it’s the broadest range of sunscreen used in cosmetics. In other words, it’s brilliant in its league.
The negative side is that it can feel heavy on the skin. It can leave a slight whitish tint on the surface of the skin and some people may not like this. Keep in mind that it’s relatively easy to wash off, so it’s better to use water-resistant sunscreens if you are swimming.
2
Water
Roles: Solvent
Water is a great solvent. It’s neutral and doesn’t provide any strong positive or negative effects. It just helps components to mix better and to transport active components.
C12-15 Alkyl Benzoate is mostly used as formulation component. It gives the product a soft and silky but non-greasy feeling. As for the skin benefits, it's an emollient – it makes the skin softer and more hydrated. It also helps to kill bacteria and increase the product’s shelf life.
Isododecane is an emollient and a good base for colorants. Very often used in powders and shades because it spreads on the skin nicely. It also helps to soften the skin and helps to lower water loss making all the moisturizing components work better.
6
Lauryl PEG-8 Dimethicone
7
Dimethicone/Vinyl Dimethicone Crosspolymer
Roles: Viscosity controlling
8
Propanediol
Roles: Solvent, Viscosity controlling
Moisturizing
Hair conditioning
Propanediol is a good solvent, emollient and humectant. It helps to moisturize the skin and prevent moisture loss. In haircare products, it conditions hair and improves absorption of the product.
9
Dimethicone
Roles: Skin conditioning, Antifoaming, Emollient
Silicones
Dimethicone is the most popular silicone. It makes the skin softer and forms a film adding smooth and silky feeling. This film not only improves how the skin feels but also works as a protective barrier. It also improves the visual appearance of your skin by filling small wrinkles. That's why some people think dimethicone removes wrinkles. Actually, it does not. It's just a visual effect.
One of the most important characteristics of this component is that it helps to spread other ingredients evenly on the surface to provide good coverage. It's very important because you want all your skin cells to receive an equal proportion of the components.
Dimethicone is considered as safe, but remember that it is rather difficult to wash off! This may lead to clogged pores and acne if you use it too often and don't wash off quite well.
Niacinamide is a form of Vitamin B3 and it’s a superman in cosmetics. This ingredient is researched very well. It has a lot of positive reviews from scientists and experts. It's very important for healthy skin. The lack of this vitamin can cause dryness, itching, and sun sensitivity. The component removes small wrinkles and fine lines, heals wounds, and prevents the forming of cancer cells. It also makes the skin tone even by removing dark spots. It increases ceramide synthesis which increases the overall health of your skin. It fights acne and lowers pores.
Researches say that 4-5% of Niacinamide is the most effective concentration for skincare use.
Lauryl PEG-10 Tris (Trimethylsiloxy) Silylethyl Dimethicone
16
Maltodextrin
Roles: Skin conditioning, Binding, Emulsion stabilizer, Film former, Hair conditioning
Maltodextrin is an organic sugar derived from corn, rice, or potato. It is a multipurpose ingredient. It is a skin softener, absorbent, and film-forming agent. But mostly it’s used because of its viscosity-controlling effect. It makes the product feel even. It is ruled safe by CIR for use in cosmetics.
17
Sodium Chloride
Roles: Flavoring, Viscosity controlling
Antiseptic
Sodium Chloride is a very famous ingredeint also known as Salt. Yes, it’s the same salt you can find on your table. In cosmetics, it is used as a preservative helping the product to live longer. It is also used as a peeling agent in different scrubs. Human contact with this element since ancient times and that's why it is 100% safe.
Bisabolol is one of the most effective healing ingredients in cosmetics. It is a great component for reducing inflammation. It contains a lot of Vitamin B5 known as Panthenol, but it acts much better than Panthenol due to its wider effectiveness. It softens the skin and helps to recover skin cells after dryness. It is also a nice protector – it helps to protect the skin from aggressive chemical and physical impact. Bisabolol, Panthenol, and Allantoin are the true saviors and very often you can find all these 3 components mixed in a product for better efficiency.
20
Ethylhexylglycerin
Roles: Skin conditioning, Deodorant
Moisturizing
Softening
Antiseptic
Deodorant
Ethylhexylglycerin makes the skin softer, smoother and more hydrated. It acts deeply but without any heavy or sticky feeling. In haircare products, it works as a conditioner and scalp cleanser. It is safe but only in concentration below 8% in rinse-off products and below 2% in leave-on products. Can be an irritator in higher concentrations. In general, this component is great if you see it somewhere at the bottom of the list.
21
Allantoin
Roles: Skin conditioning
Moisturizing
Pore Shrinking
Softening
Soothing
Regeneration
Good for dry skin
Good for oily skin
Allantoin usually doesn’t catch too much attention, but it is an essential ingredient for sensitive, dry, and problem skin. It is a good moisturizer that makes skin hydrated. But manufacturers love it because of its strong soothing effect. It also exfoliates dead cells, stimulates recovery of your skin, and helps to protect the skin from the sun, frost, and similar negative impacts.
The component is researched very well and its soothing activity is confirmed by scientists. Used in concentration between 0.5-2%.
22
Dimethylmethoxy ChromanolAntioxidant
Lightening
23
Caesalpinia Spinosa Fruit Pod Extract
Roles: Hair conditioning, Hair waving or straightening
Caprylyl Glycol is a vey popular skincare ingredient. It makes the product spread better and feel better on your skin. It’s a preservative and it improves the effect of other preservatives. It’s also a humectant which helps to retain water. It’s good for keeping your skin in good shape. But manufacturers use it as a supporting component rather than the main one.
Hexylene Glycol is mostly used for formulation purposes. It’s a good surfactant, emulsifier, and viscosity-reducing agent. It maintains the density of the formulation of the product preventing it from separating. It also makes the product feel better.
28
Tetrasodium Glutamate Diacetate
Roles: Chelating
29
Isoceteth-10
Roles: Emulsifying, Surfactant
30
Silica
Silica is used for improving texture of the product. It helps the product to spread out evenly. Very often it’s used in different exfoliants as an abrasive. It's safe and non-toxic.
31
Sodium Hydroxide
Roles: Buffering
Sodium Hydroxide is used mostly for formulation purposes. It helps to hold the pH level of a product. It also works as a chemical exfoliator that removes dead cells. Usually concentration of this component is low in skin care products and it’s used mostly for adjusting pH.
32
Phenoxyethanol
Roles: Fragrance, Preservative
Antiseptic
Phenoxyethanol is one of the most popular preservatives. It kills bacteria and makes the product live longer. Manufacturers like this ingredient because it can dissolve in any liquid, even in oils.
Another purpose of this component is the fixation of aromas in perfumery. Phenoxyethanol is also used as a strong antiseptic and a good antibacterial agent. It is widely used in dermatological cosmetics alongside natural antiseptics such as chamomile, sage, and calendula.
33
Sodium Benzoate
Roles: Fragrance, Masking, Preservative
Antifungal
Antiseptic
Sodium Benzoate doesn’t have any great skincare effects and is used for formulation purposes. It’s a corrosion inhibitor, fragrance ingredient, and preservative. It is not a broad-spectrum preservative and it’s used with other preservatives for good efficiency. It’s safe, but people with eczema or a history of skin allergies should use this component with attention.
Benzoic acid is a preservative and pH adjuster. Human skin accepts this component very nicely. It doesn’t cause irritation or other negative reactions. In 2017 there was a Cosmetic Ingredient Review Expert Panel meeting that confirmed the safety of this ingredient in skincare.
35
Dehydroacetic Acid
Roles: Preservative
Antiseptic
Dehydroacetic Acid is a nice preservative. It has potent antifungal and antibacterial properties. It’s not toxic and it doesn’t irritate the skin. Used to increase the shelf life of a product.
36
Iron Oxides (CI 77491
37
Iron Oxides
Roles: Colorant
Moisturizing
Iron Oxides are colorants. They give different colors to the product: yellow, red, or black. Different scientific researches show that they are much safer than other organic colorants. That's because they are much more stable and they don’t provoke allergic reactions. Though they can be received from minerals organically, manufacturers don’t use natural Iron Oxides. They chemically synthesize them in a laboratory to get a pure component without extra chemicals.
